Another Statements HT (Monitors, Statements II, Statements II Center)

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Pknaz
    replied
    Originally posted by TEK
    IF you could still buy them and IF I was a billionaire, maybe....I was actually just looking at those the other day. I think my 106" screen and projector will get me 90-95% of the way there in picture quality for 5% of the cost

    Leave a comment:


  • TEK
    replied
    This is what you (I) need (want):
    Explore Samsung TVs: Micro RGB, OLED, Neo QLED, Mini LED, QLED, Crystal UHD & Lifestyle TVs. Find the best TV for movies, gaming, or your living space.

    Leave a comment:


  • Pknaz
    replied
    Originally posted by Renron
    PKnaz, bigger screen on order?
    You've surely got the sound figured out.
    Ron
    YES!

    The plan is to go projection after the holidays.

    Leave a comment:


  • Renron
    replied
    Originally posted by Pknaz
    What??? You don't want to see my feet/socks...
    Good thing "smell O vision" never really took off. We all would be sorry.

    PKnaz, bigger screen on order?
    You've surely got the sound figured out.
    Ron

    Leave a comment:


  • Jim Holtz
    replied
    Originally posted by Pknaz
    Very much so! I had the monitors integrated really well with my old subs, but haven't had a chance to integrate the towers with the new subs and new pre/pro just yet - the towers without subs sound amazing! Thank you very much for all of your help and continued contributions to the community!

    I was looking at the new Micro Statements for side speakers, but their marginally less expensive than a set of Monitors and I'm not crunched on space requirements, so I may go with another set of Monitors for my side speakers!
    I think the Monitors are a very good choice for surround if you have the room for the larger cabinet. As you know, that's what I use in my system and I'm really happy with them.

    Your feed back is what Curt and I enjoy most. Curt's development work is a true labor of love for him. Me, I just want to keep updating my system and I like to help people when I can.

    Enjoy the new system! :T

    Jim

    Leave a comment:


  • BobEllis
    replied
    Originally posted by Pknaz
    What??? You don't want to see my feet/socks...
    I understand completely, I had to buy new socks for my sock shot.

    Nice looking speakers. Enjoy them.

    Leave a comment:


  • Pknaz
    replied
    Originally posted by Jim Holtz
    They look great! I hope they meet your expectations!

    Jim
    Very much so! I had the monitors integrated really well with my old subs, but haven't had a chance to integrate the towers with the new subs and new pre/pro just yet - the towers without subs sound amazing! Thank you very much for all of your help and continued contributions to the community!

    I was looking at the new Micro Statements for side speakers, but their marginally less expensive than a set of Monitors and I'm not crunched on space requirements, so I may go with another set of Monitors for my side speakers!

    Leave a comment:


  • Pknaz
    replied
    Originally posted by BobEllis
    It's supposed to be a SOCK shot.
    What??? You don't want to see my feet/socks...

    Leave a comment:


  • BobEllis
    replied
    It's supposed to be a SOCK shot.

    Leave a comment:


  • Jim Holtz
    replied
    They look great! I hope they meet your expectations!

    Jim

    Leave a comment:


  • JoeAngelicchio
    replied
    Great foot shot :T

    Leave a comment:


  • Pknaz
    replied
    And my make shift rear speaker stands. They're not to Dolby spec, but I needed to get them a bit higher since my seating is high back and ear height on the rear channels just won't work.
    This is temporary until I can get my subs perfectly situated in the room.
    Click image for larger version

Name:	IMG_0173.jpg
Views:	1
Size:	28.9 KB
ID:	862510

    Leave a comment:


  • Pknaz
    replied
    For those wanting the "foot" shot, here ya go! :lol:
    Click image for larger version

Name:	IMG_0172.jpg
Views:	1
Size:	72.6 KB
ID:	862509

    I've since finished the Monitor cabinets with the same round-over on the fronts and top of the cabinets and put 3-4 coats of Duratex on them. My method is a thick heavy first coat with two to three thin coats. After the first coat, I sand mostly smooth with 220grit using a semi random orbital. After the last coat, I do a very light orbital sanding with 320 grit. This leaves the texture almost consistent with a vinyl or leather feel. Smooth, satin finish.
    Click image for larger version

Name:	IMG_0168.jpg
Views:	1
Size:	76.6 KB
ID:	862507


    I had a lot of problems with the towers and using duratex inside the driver cutouts, so I'm attempting something different. This actually worked out really well! :lol:
    Click image for larger version

Name:	IMG_0171.jpg
Views:	1
Size:	68.5 KB
ID:	862508

    Leave a comment:


  • Renron
    replied
    The one sock on was a nod to Bob Ellis for completing his build first. We had a gentlemanly rival ongoing during our builds.
    Congratulations on a fantastic setup.
    Ron

    Leave a comment:


  • wkhanna
    replied
    My dear friend, Michael (Finleyville) decided to modify the tradition in his typical non-traditionalist fashion...





    His build is HERE

    Last edited by theSven; 30 April 2023, 15:36 Sunday. Reason: Update htguide url and image location

    Leave a comment:


  • wkhanna
    replied
    :roflmao:

    Leave a comment:


  • scottvalentin
    replied
    Feel free to wear both socks!

    Leave a comment:


  • wkhanna
    replied
    HERE is a V good example

    8)

    Last edited by theSven; 30 April 2023, 15:35 Sunday. Reason: Update htguide url

    Leave a comment:


  • Pknaz
    replied
    Originally posted by JoeAngelicchio
    Geez at first I thought you had three hands!!! WOW!! Speakers look great!!!! What subs are those??
    They are https://www.parts-express.com/dayton...ndle--300-7093
    At the current price, I couldn't pass them up.
    I'm also using https://www.parts-express.com/dayton...table--300-811 to drive them, with 6db of boost at 20hz with a Q of 1 which almost flattens out the sub.

    Leave a comment:


  • Pknaz
    replied
    Originally posted by wkhanna
    :T
    great work
    i am sure many of us envy that your wife was even involved in the build.:B

    there used to be a tradition around here of posting the "Foot Shot" when a project was completed...
    What is a "Foot Shot"? happy to comply and join in on the tradition!

    Leave a comment:


  • jwanck11
    replied
    Looks fantastic, Congrats!!

    Leave a comment:


  • wkhanna
    replied
    :T
    great work
    i am sure many of us envy that your wife was even involved in the build.:B

    there used to be a tradition around here of posting the "Foot Shot" when a project was completed...

    Leave a comment:


  • JoeAngelicchio
    replied
    Geez at first I thought you had three hands!!! WOW!! Speakers look great!!!! What subs are those??

    Leave a comment:


  • Pknaz
    replied
    I now have all four subs and the towers in the room. Pretty fantastic so far, but quite a bit more work to do....

    Click image for larger version

Name:	IMG_0140.jpg
Views:	1
Size:	58.7 KB
ID:	862457

    Next up, REW & MiniDSP setup of the subs and Dirac Live room correction to blend everything together.

    Leave a comment:


  • Pknaz
    replied
    With the towers now assembled, it was time to cut the foam. I've read a few places around here that electric knives make short work of foam, they weren't kidding! Holy cow this thing cuts through foam like butter....$13 on Amazon well spent! :T
    Click image for larger version

Name:	IMG_0138.jpg
Views:	1
Size:	54.6 KB
ID:	862455

    A bit of hot glue and 15 minutes later I have a set of foam tunnels.
    Click image for larger version

Name:	IMG_0139.jpg
Views:	1
Size:	57.9 KB
ID:	862456

    Leave a comment:


  • Pknaz
    replied
    I finished putting four coats of Duratex on the tours this weekend, the bases were already coated pretty well, but I put an extra coat on the sides to clean them up a bit. I also put two coats on the back (Just to "black" it out) and a coat around the bottom so that the tan color didn't stick out when viewing the towers when seated.

    I took a page from Jim's book and bought a few moving blankets, wrapped up the towers and used a hand truck to carry them into the bonus room. There I started the assembly of the drivers, bases and port. To do this, I laid the tower on its back.
    This is the extent for which my wonderful wife was willing to assist, she held the crimp connectors while I soldered the joins!
    Click image for larger version

Name:	IMG_0134.jpg
Views:	1
Size:	64.8 KB
ID:	862454

    I put a round of gasket foam on the port...drilled four more screw holes (I didn't think four was enough) and patched up an error in the foam tape...I can't hear the gaps...can you? LOL
    I used a bit of blue painters tape around the different sections of the port and flare pieces to make tight fittings. There is no tape on the inside of the port so no worries on turbulance, though, with a down facing port I'm doubtful anyone would have heard that.
    Click image for larger version

Name:	IMG_0133.jpg
Views:	1
Size:	58.0 KB
ID:	862453

    And foam tape around the port hole between the tower and base
    Click image for larger version

Name:	IMG_0132.jpg
Views:	1
Size:	81.7 KB
ID:	862452

    Leave a comment:


  • Pknaz
    replied
    I wanted to attach the bases with lag bolts, so here I am measuring my pilot hole locations.
    Click image for larger version

Name:	IMG_0126.jpg
Views:	1
Size:	49.9 KB
ID:	862449

    The mistake I made the first time around was not having the bases centered correctly, so my first set of holes into the towers (The bases were fine) were off by an 1/8 of an inch. Yes, you can definitely hear that 1/8 of an inch difference (Sarcasm) :rofl:
    I filled the hole with a piece of HDF and glue and that worked out well.
    Click image for larger version

Name:	IMG_0128.jpg
Views:	1
Size:	102.1 KB
ID:	862451

    Ready to be bolted together....well....not quite...still have a bit more work to do before that happens.
    Click image for larger version

Name:	IMG_0127.jpg
Views:	1
Size:	51.5 KB
ID:	862450

    Leave a comment:


  • Pknaz
    replied
    Originally posted by jwanck11
    check to make sure that your freshly painted speakers aren't sticking to what they are sitting on / what is sitting on them. Duratex takes a week to cure and a bond between non-cured duratex and what it is joined to will form.
    Yup, I coated some test pieces a few weeks ago to practice getting the texture I wanted and to verify how long it would take to cure in my environment. The subs and center bottoms and back sides were coated about 4-5 days ago and are pretty well cured. The face and sides aren't quite as long, but nothing is touching those surfaces.

    Leave a comment:


  • jwanck11
    replied
    check to make sure that your freshly painted speakers aren't sticking to what they are sitting on / what is sitting on them. Duratex takes a week to cure and a bond between non-cured duratex and what it is joined to will form.

    Leave a comment:


  • wkhanna
    replied
    Originally posted by Pknaz
    let's not digress into a wire discussion, again
    (i &) we certainly do not want to derail the thread.
    further discussion on the wire topic can be held elsewhere.


    your progress is impressive.
    the completed system will be even more so.:T

    Leave a comment:


  • Pknaz
    replied
    I've finished the Center and all four subs, two of which have been setup under the Monitors temporarily.

    This is me, trying to be as efficient as possible with my coats. I was pretty much able to apply 10 separate coats this way. By the time I finished putting a coat on the fifth enclosure, the first was ready for a second coat. I waited about 5-6 hours, rotated the cabinets and did it over again. The center channel was then lightly sanded with 320 grit to smooth out the surface, the texture is almost a cross between a nice leather and vinyl.
    Click image for larger version

Name:	IMG_0113.jpg
Views:	1
Size:	54.1 KB
ID:	862442

    Here is a shot of two subs and the center in my listening room. They sound pretty terrible for now, they're currently running with the old Paradigm sub Dirac settings. I'm pretty confident that once I get my Dirac laptop working again, they'll be singing beautiful songs.
    Click image for larger version

Name:	IMG_0117.jpg
Views:	1
Size:	35.0 KB
ID:	862443

    Leave a comment:


  • Pknaz
    replied
    1st coat, that's all
    Click image for larger version

Name:	IMG_0121.jpg
Views:	1
Size:	76.8 KB
ID:	862441

    Leave a comment:


  • Pknaz
    replied
    let's not digress into a wire discussion, again

    Leave a comment:


  • Renron
    replied
    Bill,
    Another fly here, Silver plated high strand count on the mids and tweeter sounds better to my ears than plain copper. No science just placebo, maybe.
    Different gauge wires for different frequencies. Of course you can go all out with a cryo crystalline aligned wire too. Supra wires are a great choice IMO.
    Ron
    What the heck do I know??? nothin'

    Leave a comment:


  • wkhanna
    replied
    changing parts &/or material (aka an input) of any system will nearly always change its output.

    the question is, "is it change for the better?"

    Leave a comment:


  • Steve Manning
    replied
    Originally posted by wkhanna
    no worries, i receive as well as i give

    the link, i believe, will provide some insight into the differences we encountered.
    As well you should ..... the thread was interesting. I have seen Tony Gee and Troels do wiring and crossover upgrades on B&W as well as other brand speakers making major differences in performance.

    Leave a comment:


  • wkhanna
    replied
    Originally posted by Steve Manning
    For shame Bill ..... sorry I had to give you hard time....
    no worries, i receive as well as i give

    the link, i believe, will provide some insight into the differences we encountered.

    Leave a comment:


  • Pknaz
    replied
    How much of what we hear is determined by what we think we hear?

    Leave a comment:


  • Steve Manning
    replied
    Originally posted by wkhanna
    we broke the first first rule of scientific testing & changed both at the same time, iirc.
    For shame Bill ..... sorry I had to give you hard time. Thanks for the link on the test, I'll give it a peruse.

    Leave a comment:


  • wkhanna
    replied
    we broke the first first rule of scientific testing & changed both at the same time, iirc.
    my personal experience is that the effects are additive, but due to lack of recall, I can not even give anecdotal evidence of comparative efficacy.

    you can find our report here:

    Last edited by theSven; 30 April 2023, 15:38 Sunday. Reason: Update htguide url

    Leave a comment:


  • Steve Manning
    replied
    Originally posted by wkhanna
    just to put a fly in the ointment, Dan (PewterTA) & i found discernible sound quality improvement when we replaced spade terminals with silver soldered junctions on B&W bookshelves (et.al.) in combination with upgraded Belden wire.
    Just for fun I must ask ..... was it from the solder or the wire, or both?

    Leave a comment:


  • wkhanna
    replied
    just to put a fly in the ointment, Dan (PewterTA) & i found discernible sound quality improvement when we replaced spade terminals with silver soldered junctions on B&W bookshelves (et.al.) in combination with upgraded Belden wire.

    Leave a comment:


  • Renron
    replied
    Slip on connectors make it easy to remove drivers for any reason in the future. Soldering is OK if you don't mind un-soldering or cutting wires later.
    There is no difference in sound quality that I am aware of.
    Wire wise, 14ga. multi stranded wire is what I prefer. 18ga. for tweeters. 14ga. is probably overkill for most drivers, but you won't have to worry about voltage drop / resistance losses.
    Ron

    Leave a comment:


  • jwanck11
    replied
    On one center channel, I soldered straight to the driver's tabs and on the other, I used the connectors you linked to. There is no audible difference between the two.

    Leave a comment:


  • Pknaz
    replied
    Got quite alot done today. Sanded all of the sub cabinets and the center. Put at least one coat, and in some cases two coats of Duratex on at least five sides of each of the four subs and center cabinet.

    Leave a comment:

Related Topics

Collapse

  • impala454
    Chuck's Statements 7.1 Build
    by impala454
    This thread will document my build of a complete 7.1 set of Statements (with sub). Note: This set was started with only my second build ever. Please take all of this thread with a large grain of salt. My motive in posting it was just to give a DIY newbie's experience which might help out other newbies....
    29 July 2008, 01:52 Tuesday
  • Jim Holtz
    Statements II - A musical evolution!
    by Jim Holtz
    A full description and plans are now available on Curt's website!

    My musical reference!

    Statements II – An evolution for the music lover!
    The Statements II are the result of the Finalists project which focused on achieving the best midrange possible but with an eye on...
    25 June 2014, 18:03 Wednesday
  • impala454
    Statements MT only?
    by impala454
    I have a small apartment and am working to downsize my stuff somewhat. I was wondering if it would be difficult (or maybe even if it already exists) to design a MT only speaker for use as surrounds, using the existing Statements MT drivers (the Tang Band 1337 and Fountek NeoCD 3.0). I realize it wouldn't...
    13 May 2012, 21:42 Sunday
  • impala454
    Rebuild a Statements Monitor into a Lineup R4
    by impala454
    I have four Statements Monitors and love them, however I'm finding I'd like my rear channels to be smaller in size, and figured the Lineup R4 would be perfect. I could re-use the drivers and just build the R4 boxes. I've taken a look at the two designs and noticed there's not much re-use in the crossover...
    21 June 2015, 22:59 Sunday
  • Jim Holtz
    New center channels for the Statements II and The Finalists!
    by Jim Holtz
    You can't have a new speaker without a new center channel to compliment it for home theater.

    Statements II and The Finalists Center Channel

    During the last several years the original Statements have been frequently used as mains for home theater systems. The original Statements...
    26 June 2014, 20:12 Thursday
  • Loading...
  • No more items.
Working...
    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"