So i've searched, I know the rule of thumb.. I know PE sells the stuff.. but why hasn't there been some sort of sticky that lists specific drivers and the associated mounting hardware? Why not make everyones life easier and list proven solutions.. it would make ordering from PE much easier
Tweeter:
Dayton DC28FS - #6 Machine Screw with T-Nuts
Woofer:
Dayton RS150S 6" - #8 Machine Screw with T-Nuts
Dayton SD315-88 12" - #10 Machine Screw with T-Nuts
I'll get specifics on the machine screws later today, kind of forgot if they are
-24 or -32
I realize that the DC28FS and RS150 don't need T-Nuts, panhead screws would work just fine, but this was used for my first run/proto box..
Tweeter:
Dayton DC28FS - #6 Machine Screw with T-Nuts
Woofer:
Dayton RS150S 6" - #8 Machine Screw with T-Nuts
Dayton SD315-88 12" - #10 Machine Screw with T-Nuts
I'll get specifics on the machine screws later today, kind of forgot if they are
-24 or -32
I realize that the DC28FS and RS150 don't need T-Nuts, panhead screws would work just fine, but this was used for my first run/proto box..
Comment