Hello. What I'm wanting to do is spend as little as possible to get a DIY theater (temporary until I've saved up some money to upgrade). This is what I've planned on getting so far, so could you please comment and make suggestions? I'm from Canada, so I would like to get everything I will need at once, if possible . I am also wondering what other tools etc. I will need to make speakers. I already have a table saw and router. Thanks .
Receiver:
Yamaha RX-V459 = $169
Subwoofer:
Dayton DC250-8 10" Classic Woofer = $23
--> Dimensions (HWD) = 45"x12"x12" (Ported 2.5 cf @ 13Hz)
--> Material = 1" MDF w/ second sheet on front baffle
--> Ports = Two 3"x1", each 36" long, top firing
Speakers:
5 x Tang Band W3-593SF 3" Driver = $44
--> Dimensions (HWD) = 11.6"x7.8"x5.3" (Sealed .138 cf)
--> Material = 3/4" MDF
Binding Posts:
5 x Dayton BPA-38NI HD = $41
Speaker Wire:
Dayton 14AWG 100ft. = $45
Jasper Jig:
Jasper Circle Jig 200 & 400 Combo Pack = $50
Receiver:
Yamaha RX-V459 = $169
Subwoofer:
Dayton DC250-8 10" Classic Woofer = $23
--> Dimensions (HWD) = 45"x12"x12" (Ported 2.5 cf @ 13Hz)
--> Material = 1" MDF w/ second sheet on front baffle
--> Ports = Two 3"x1", each 36" long, top firing
Speakers:
5 x Tang Band W3-593SF 3" Driver = $44
--> Dimensions (HWD) = 11.6"x7.8"x5.3" (Sealed .138 cf)
--> Material = 3/4" MDF
Binding Posts:
5 x Dayton BPA-38NI HD = $41
Speaker Wire:
Dayton 14AWG 100ft. = $45
Jasper Jig:
Jasper Circle Jig 200 & 400 Combo Pack = $50
Comment