DCX2496, 6 channel R/C volume control kit and...
Collapse
This topic is closed.
X
X
-
DCX2496, 6 channel R/C volume control kit and...
IB subwoofer FAQ page
"Complicated equipment and light reflectors and various other items of hardware are enough, to my mind, to prevent the birdie from coming out." ...... Henri Cartier-BressonTags: None- Bottom
-
Didi you see this page? http://www.selectronic.fr/upload/pro...ogue/15-08.pdf. See anything familiar being used?
Chuck- Bottom
-
Originally posted by chasw98See anything familiar being used?
Chuck
IB subwoofer FAQ page
"Complicated equipment and light reflectors and various other items of hardware are enough, to my mind, to prevent the birdie from coming out." ...... Henri Cartier-Bresson- Bottom
Comment
-
Downstream volume control is the Mercedes of SQ using the DCX but I think you can get 90% of the way there just doing like the pro guys have always done and optimizing your gain structure. That means you set the gains of all the components (preamp, EQ, amp, speakers) so they all clip at about the same time as you increase the signal level. For the DCX that means you need adjustable gain on the amps to set the levels. It could be the built-in gain knobs on a pro amp or a pot or fixed resistors between the DCX and the amp.
- Bottom
Comment
-
8 ch volume if you need 2 extra for your 4 ways, subs, etc. for $500
Welcome to Emotiva Audio Corporation. Home Audio Systems, Speakers & Accessories and more. We use science to evoke the true emotion behind every note.
8 ch volume with tweeter and midrange amps for $400
Konica Minolta Business Solutions Europe is your partner for smart IT services & systems, multifunctional devices & professional printing!
No Fraunch required
cheers,
AJManufacturer- Bottom
Comment
-
Originally posted by AJINFLA8 ch volume if you need 2 extra for your 4 ways, subs, etc. for $500
Welcome to Emotiva Audio Corporation. Home Audio Systems, Speakers & Accessories and more. We use science to evoke the true emotion behind every note.
8 ch volume with tweeter and midrange amps for $400
Konica Minolta Business Solutions Europe is your partner for smart IT services & systems, multifunctional devices & professional printing!
No Fraunch required
cheers,
AJthe AudioWorx
Natalie P
M8ta
Modula Neo DCC
Modula MT XE
Modula Xtreme
Isiris
Wavecor Ardent
SMJ
Minerva Monitor
Calliope
Ardent D
In Development...
Isiris Mk II updates- in final test stage!
Obi-Wan
Saint-Saëns Symphonique/AKA SMJ-40
Modula PWB
Calliope CC Supreme
Natalie P Ultra
Natalie P Supreme
Janus BP1 Sub
Resistance is not futile, it is Volts divided by Amperes...
Just ask Mr. Ohm....- Bottom
Comment
-
I own the Emotiva, and am currently using it as a preamp (via bypass) while I finish some things up on the other system. It surprisingly is quite transparent and far better sounding than what I expected. HT gear has come a long ways since just 4 or 5 years ago when I started this hobby. Back then I owned a BK processor that sounded like @$$ compared to this.
It isn't a Burmeister (or whatever uber brand you choose) but it doesn't seem to get in the way either. For using as an 8 channel volume control, I think it should work well and it also offers HT features if that is what you need. Does anyone know what analog volume controller chip they are using?- Bottom
Comment
-
Originally posted by AJINFLA8 ch volume if you need 2 extra for your 4 ways, subs, etc. for $500
Welcome to Emotiva Audio Corporation. Home Audio Systems, Speakers & Accessories and more. We use science to evoke the true emotion behind every note.
8 ch volume with tweeter and midrange amps for $400
Konica Minolta Business Solutions Europe is your partner for smart IT services & systems, multifunctional devices & professional printing!
No Fraunch required
cheers,
AJ
The HK receiver. Doesn't that only have 5.1 analog inputs on the rear of it? From my understanding, you can only use a receiver like that for 5 channels of amplification. The .1 input is merely for outputting to the sub out (you gain volume control over it, that's all).- Bottom
Comment
-
- Bottom
Comment
-
Beautiful!
Right now I'm using two Panasonic SA-XR25 digital receivers as my volume control/amplification for my DCX2496. The only problem is that once in a while they won't stay in sync when I use my remote control, but it's rare and quickly fixed by getting off my behind and adjusting it. They have almost no noise floor and sound absolutely fantastic.
AJ, what are you using with your DCX2496?- Bottom
Comment
Comment