Ok, I'm new to this forum and have been reading a lot lately trying to figure out what the best design for a new center channel speaker would be. I've looked at the Dayton RS WMTW and the Modula MTM and i have a few questions. First off, the Dayton RS will not fit in my TV stand, it is way too large. The Modula MTM, however, will. So my plan was to build the Modula, the only problem is that i wanted more bass output out of my new center. (My current center is a Polk Audio CS-250
So my question is, would it be possible (and smart of course) if i used the Dayton RS180S-8's (7" drivers) rather than the RS150S-8's in the MTM design? Also, if this is possible, what exactly would i have to change with the crossover.
Thanks in advance.
Jacob
So my question is, would it be possible (and smart of course) if i used the Dayton RS180S-8's (7" drivers) rather than the RS150S-8's in the MTM design? Also, if this is possible, what exactly would i have to change with the crossover.
Thanks in advance.
Jacob
Comment