Benq 6200 or Infocus 4805?

[JohnSC]

Hi,

I am about to pull the trigger on a front proj. What do you think of the Benq Vs the Infocus? Or do yhave any other suggestions around the $A2,500 mark?

[George Bellefontaine]

I am always cautious about making recommendations because I feel you have to see something for yourself. But as far as differences go: The 6200 is a 4:3 dlp PJ with a resolution of 1024 x 768 ( the same as the NEC Ht1000 I own.) The BenQ has a 16:9 mode for widescreen and this gives a res of 1024 x 576. You may notice some light spill with a 4:3 PJ unless you use dark masking around your screen. As for the 4805, well it has a lower res of 854 x 468. The good thing is you don't have to concern yourself about light spill as the Infocus has a true 16:9 shaped dmd. But really, you should see them both before making a decision.

[Claude D D]

I compared both as well as several other DLP's and LCD's and ended up going for the 4805. :T

[Bam!]

Claude ...you should visit TTP.......

[Claude D D]

Claude ...you should visit TTP.......

Thanks Bam. :T

[SpOoNmAn]

I went with the 4805 after comparing, and couldnt be happier :T