Rotel RB 1592
Collapse
This topic is closed.
X
X
-
-
Very interesting!
I found especially intriguing the comment:
"Rotel have decided to use class-D amplification for Home Theatre products only because the technology produces less than acceptable distortion below 30Hz when compared with conventional amplification."
Sounds like another example of ‘newer is better’ technology falling short of its promise. :E
Gee, where have I heard that before? :W
Doesn’t look a whole lot different on the inside than my RB-1090.
I would love to hear it in my system to see if or how different it really is.
Thank you for the post, Mikael!
Edit: Added pics of my amp. Please excuse the photo quality, these recent shots were taken with a cell phone.
- Bottom
Comment
-
With a little bit of searching, there are some internal pics of both the 1090 and 1592 available. I was also able to find some specs on the 1592. With internal pics appearing very, very similar and with available specs also the same, can we expect anything new in this unit or is it simply a repackaging?
I know Class A/B amp technology hasn't moved as fast as some of the other tech out there, but with the original issue 1090 being over 10 years old, I would expect some change to have happened. I'm not saying it is identical, but if it looks like a duck........
Norm- Bottom
Comment
-
Quack Quack :W- Bottom
Comment
-
Originally posted by paullyhey wkhanna...why'd you pull your amp apart? when you strip it down it looks quite modular..
You can check it out here.- Bottom
Comment
-
I've got some better pictures of the RB-1090 opened up. I would say it's (if not) identical to the new 1592... All it looks like is... they put it in a new case.
Which I'm not saying that's a bad thing... It's a GREAT amp.
But it looks very very very very very similar.... I'm guessing they probably are using better parts, but in the same way as the old RB-1090.
All I did on Bill's and my 1090 was solder all the crimped connectors to the wires at all points. Then any points where I didn't want to solder (screw locatins) I made sure to put Deoxit gold on all touching points. This made a very noticeable and welcomed change to the Amp's tonal qualities. Everything seemed to clean up and release a lot of extra detail in the sound and control over the speakers. Made it seem like a quicker/more powerful amp. Not saying it increased in power mind you...but it seems like it's a more clean and true signal passing through. Maybe made it seem more transparent!?!!?Digital Audio makes me Happy.
-Dan- Bottom
Comment
-
Originally posted by PewterTA.... I'm guessing they probably are using better parts, but in the same way as the old RB-1090.
Otherwise, it appears to be the V same chassis, simply with a different front panel to match the 15 series.
So they resurrect a 10 year old design, slap some new make-up on the face, possibly add a few higher-grade capacitors……….
……..oh, I can’t wait to find out what the msrp is going to end up being. :W
It may actually result in boosting the price in the used market for the 1090……. :E :E :E- Bottom
Comment
-
actually i saw it advertised on a Japanese website for 3600US discounted from RR of about 4000US.
about soldering lugs. there's a reason they don't solder them. the amount of heat you need to apply to solder large lugs causes the solder to wick up the copper wire. It makes the termination stiff and suffers from stress fractures. That's why no soldering is allowed on mains electrical work. it's unsafe. But in this application it should be fine. that's not a small project you took on. you must be a bit of a techo..
Actually when soldering any wire there are special tweezers that you use to hold the wire. the tweezers suck the heat out of the wire which prevents the solder from wicking up the wire. this maintains maximum flexibility at the joint. i cant remember what they are called but i can send youa pic if you wanna see one.- Bottom
Comment
-
Originally posted by paully......about soldering lugs. there's a reason they don't solder them.........
Regarding soldering, it is a learned skill. Applying the correct amount of heat for the correct time at the appropriate location to achieve the desired result. Properly executed, V little ‘wicking’ will occur up the stranded wire away from the joint. And yes, heat sinks can be used to assist.
There is a reason some high-end audio equipment is assembled using only point-to-point wiring. It sounds better.- Bottom
Comment
-
Yeah bill you raise a good point about high end gear direct wiring. So by soldering the lugs you improved half of the terminal connections in the amp. I presume getting rid of the lugs al together and direct soldering would have made it very difficult to service and something you probably don't wanna do.- Bottom
Comment
-
Originally posted by wkhannaSo they resurrect a 10 year old design, slap some new make-up on the face
No, I didn't mean that Bill! If the RB-1592 had been around when I bought my Emotiva then it may well be powering my 803Ds now.
Nigel.- Bottom
Comment
-
Originally posted by bigburnerLike putting lipstick on a pig?
Nigel.
:roflmao:- Bottom
Comment
-
Paully you are correct, it does stiffen the wire and forms it so it does not want to move it all.. Which considering the wires in the amp are formed into position from being in there so long does not make a real issue. I did use the clamp so the heat didn't get too much down the wire and damange anything.
Basically, I've just gotten to the point of not caring if something breaks...it can be fixed! ha ha. Well maybe more to point of, they put it together so it's gotta come apart... and well looking at how things are... can I easily improve things without having to redesign what's in here. I'm good with replacing parts to a certain point...but testing with tons of meters and verifying everything...well not quite.
I am good at reading through the service manual and getting the amp back into spec though! :T
Digital Audio makes me Happy.
-Dan- Bottom
Comment
-
Here's one of the pictures of the right channel (right side of the amp if you are facing the front). Well in the picture the front of the amp is to the left and back to the right.
If you look at the one photo in the link you can see down the right side and it's almost 100% identical.
Digital Audio makes me Happy.
-Dan- Bottom
Comment
-
Here's with the large Capacitors removed and you see the torodial transformers like in the one internal picture.
Either rotate this picture 90 degrees clockwise or the picture on the website 90 degrees counter clockwise and you're looking at almost the identical picture. lol
This is the left channel.
Digital Audio makes me Happy.
-Dan- Bottom
Comment
-
I just found a picture of the RB 1592 in black, it's good looking
- Bottom
Comment
-
Timbaland...interesting question. Since this thread started in February 2012, I waited and waited for the 1592 to be released in North America. My 1090 was vintage 2000-2001, and I wanted to update to a new model. Got tired of waiting on Rotel, so a couple months back I bought another brand and sold the 1090. Maybe Patrick Butler from B&W Group can shed some light as to why the 1592 was never released here.- Bottom
Comment
-
I sent an email to Rotel to find out about the 1592 and they gave me a story which doesn't make sense. They said the following:
Rotel is looking at a replacement amp for the RB-1090 and a few prototypes have made however I am not certain what the model number will be or if they are going to pursue the manufacturing of the new amp for public release.
It is still in the testing phase and Rotel wants to be sure it has very good sound quality and is reliable.
I believe it will be shown at the Cedia Expo this summer or fall and by then they should know for sure if it will be released to the public.
What I don't understand is the 1592 exists in this website: http://www.rotel.cn/Downloads/Manuals/RB1592.pdf- Bottom
Comment
-
Comment