I was wondering if I should keep using Sonos analog out out or use digital and let 1560's DAC do the conversion?
Eventually I'm planning to get Musical Fidelity V-DAC anyways.
Eventually I'm planning to get Musical Fidelity V-DAC anyways.
-
-
Definitely use the 1560 DAC. The Sonos analog out is not very good. -
I would listen to the same song over and over trying it both ways. If you use high quality IC's for analog , you will be able to hear what the DAC's in the Sonos can sound like. If you decide to use the Optical out , make sure you also use a high quality cable so you reduce or remove Jitter from your tests to make it fair.Originally posted by grit
I don't know what DAC's are in the Sonos ZP90 but I have not be let down on the hundreds I have Installed.
Anyone know what DAC's are in the ZP90? What is Rotel using these days?Comment
-
Compare the two and decide for yourself which sounds better.Dan Madden :TComment
-
Hi All,
Anyone have any specs on the DAC inside the RSX-1560? The site gives info on the one inside the 1570, but nada on the 1560. I couldn't see anything in the manual either.
Thanks in advance!05 June 2009, 16:37 Friday -
No sound from Pc or Tv using a Dac
I have bought new speakers and ordered many cables and a Dac.This is my first Dac and it's a cheap one.
It's not a usb Dac.I connected an optical cable to Pc and connected the other end of the cable to the Dac's optical input.Then connected... -
i am looking for a 2-ch dac for very good stereo performance.
at the moment i use my spp-300 dac (spdif-coax) for my digital audio.
don't want to spend money on an expensive cd player anymore.
don't need it for multi channel (keep using my ssp-300 for HT)
the budget... -
Alright folks,
I'm running some B&W 705s on an Arcam AVR100.
My PC is the hub of all my entertainment. Currently I have it send the signal optically (via toslink cable) to the amp, then the Arcam uses it's DAC.
I've been looking at the new sound card... -
Hello,
I have a Rotel RSX 1560. My setup is 5.1 and I do not have Center Back speakers. I want to configure the receiver so that I can use the two Center Back amps to power speakers in my backyard - as Zone 2. I can't seem to get it to work.
Here is what I have already...
Comment