1068 problem - power standby/on

Collapse
This topic is closed.
X
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • ariches
    Junior Member
    • Dec 2005
    • 1
    #1

    1068 problem - power standby/on

    I've had my 1068 for about a month now. I leave the master power switch on the back on at all times. But several times when using the remote to switch from standby to ON the blue/violet light goes OFF and nothing else happens (the display stays blank) and repeatedly pressing the standby button on the front has no effect. I have to physically turn the master power switch at the back off and then on again to reset the unit. This has only happened three times in about 5 weeks but does anybody know what might be the cause. Thanks.

    BTW Software version is 1.2.2
    Tags: None
      • Bottom
    • pbarata
      Senior Member
      • Feb 2003
      • 175
      #2
      Don’t want to fright you, but I had the same problem with my RSP-1066 and one day it didn’t power up, the main processor board broke.

      Just look at

      HTGuide Forum
      http://www.htguide.com/forum/showthread.php4?t=13420&highlight=rsp-1066+died


      there are same procedures you can take to diagnose better your problem.

      Or simply your setup makes the unit goes to standby mode after a power up.
      Movies: Samsung LCD LE37A557, Rotel RSP-1066 & RMB-1075, Sony PS3, VdH D-102 Hybrid III interc, QED XT-350 & Supra Rondo 4x2,5 speaker cable, QED Qunex P75 coax, Monitor Audio Silver 5i/8i/10i speakers, REL Quake sub, QED Qunex SR-SW subwoofer cable, IXOS XHT458 HDMI, Supra LoRad, Isotek Mini Sub GII;
      Music: Rega Planar 3, Goldring 1042, Vincent PHO-8, Krell KAV-280cd, Krell KAV-400xi, B&W 703, Siltech SQ-28 Classic G5 (XLR), Siltech LS-68 Classic Mk2, Nordost Vishnu, QED Qonduit MDH6.
        • Bottom

        Comment

        Previous template Next

        Related Topics

        Collapse
        • pianorob
          CAP2100 standby-powersupply problem
          by pianorob
          Hi,

          I have a CAp2100 since November. Sound is great, but I have problem with the fuse of the standby-power supply and would like to ask whether anyone had similar problems:

          when I switch off the power button, then disconnect the power cord (e.g. to
          replace it with...
          20 January 2008, 08:43 Sunday
        • rhubarbe
          TAG AVR or RSP-1068: which to sell
          by rhubarbe
          I recently bought a TAG McLaren AV32R BP192 Surround Ex Plus 7.1. I'd say it's about five years old. I bought it for a two-channel setup in my sunlounge/kitchen.

          Prior to being tempted by the TAG, I was planning to use an RSP-1068 that is near as darn it new.

          The reason...
          18 April 2007, 16:13 Wednesday
        • Andy12
          1068 sound problem
          by Andy12
          hi i just bought 1068 yesterday, i connect everything right but cant get the sound, it seems that 1068 dont get the signal from dvd player denon 2910, which was ok with my denon receiver, the 1068 never swith to digital coax, i tried optics, same problem, finally i can get the 1068 switch to coax but...
          12 September 2005, 01:51 Monday
        • johnvb
          RSX 1055 locked out on standby power
          by johnvb
          I've owned this receiver for about 1 1/2 years now, from day one the remote control/ ir strength has been really weak. I originally set the powering up of the unit with the "direct" mode, because of the POS remote response.

          I recently upgraded to a MX-500 universal remote. After...
          07 December 2004, 10:25 Tuesday
        • JonMarsh
          Clean and inexpensive- Cambridge Audio 651W Power Amplifier
          by JonMarsh
          OnTheBench.key by Jon Hancock, on Flickr



          The Cambridge Audio 651W is now my new go-to amplifier for small and portable for speaker measurements. I got spoiled by the Benchmark AHB2- the 651W isn't truly an AHB2 replacement, but it's as close as you have any right to expect...
          17 April 2016, 15:41 Sunday
        • Loading...
        • No more items.
        Working...
          Searching...Please wait.
          An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

          Please push the back button and reload the previous window.'
          An unexpected error was returned: 'Your submission could not be processed because the token has expired.

          Please push the back button and reload the previous window.'
          An internal error has occurred and the module cannot be displayed.
          There are no results that meet this criteria.
          Search Result for "|||"