300watts!! I have been told by Rotel Customer support.
Any idea what the 1075 is ?
Rgds Steve.
Any idea what the 1075 is ?
Rgds Steve.
-
-
Steve,
The RMB-1075 reaches 200W into 4 ohms
Geoff -
Hi Steve,
Ultimate AV have a review of 1075, including measurements.
Measurments
With all five channels driven into 8ohms, the Rotel clipped (1% THD+noise) at 131 watts per channel at both 20Hz and 1kHz. Into 4ohms, clipping occurred at 204Wpc at 20Hz and 212Wpc at 1kHz. With two channels driven, the RMB-1075 clipped at 161Wpc into 8ohms and 264Wpc into 4ohms. All results presented here are for the left channel, to the nearest watt, at a line voltage of 120V.—TJN
Ultimate AV review
/DanielComment
-
I splurged a little a while back on the speakers, and am not going to be upgrading the amplifier anytime soon since a Rotel RB-180 did not sound very different at normal volumes.
I am wondering is I should switch the Sony 777ES reciever to 4ohms vs 8ohms? -
I just removed two 12 inch Image Dynamics subs from my car stereo. I want to use them in my home theatre. Need one or two dedicated amps to power these. They are 4 ohms each and rated for 500watts rms.
Looking for a good mono subwoofer amp for 600watts at 4ohms.
What...25 November 2017, 14:39 Saturday -
BRINGING DOWN THE HOUSE
Stars Steve Martin, Queen Latifah , Jean Smart and Eugene Levy. Basic plot concerns an escaped con ( Latifah) who forces herself on straightlaced, uptight lawyer ( Martin) in order to get him to help her prove her innoncence. The sudden change in Martin's character... -
I just read a review by Marshal M. Rosenthal (whoever he is) in Home Theater Mag about the new DVD, Steve Miller Band: Fly Like An Eagle--DTS.
I'd like to have this DVD but can't find it. DVD Search came up with nothing and neither did search engines.
The review heading... -
Steve I would love to build a sonosub. I would like to use a 16" tube. This would be for a bedroom entertainment center. I would like to use a 12" driver.
My budget for the speaker is 100$ not including the materials. I have an existing plate amp (250 watts rms) that i could build an...
Comment