I am looking at moving a pair of 804's. I don't have the shipping screws that the dealer removed from the FST drivers when they were delivered. Do they need to be replaced when shipped, or are they just a one time removal?
Cheers,
Cheers,
-
I did recently buy a 2 yrs old HTM1D to my 800-series setup. It's a great speaker and the sound of it is brilliant!
Yesterday I decided to tighten the diamond tweeter house on top of the Marlan head, this because it was very loose compared to the tweeter house on top of my 802D's. I know... -
I see the tension screw on the back. Is the FST mounted inside an enclosure similar to the Marin head on the 802's and up. Or is it mounted on the matrix frame? If it's on the matrix how does the tension screw attach and fasten the FST? -
Hi guys.. I noticed that sometimes there is peoples who like to check FST Screw tension on 800 series.
Here is the correct answer.. And dont use screwdriver use a coin..
"Dear Darko
The correct tension is carried out at the factory and should not need...04 December 2008, 15:17 Thursday -
Hi all,
I'm a little worried about the FST midrange drive units in my demo 804's which I recently purchased and I was hoping someone out here could help me:
- The plug in my FST midrange is not perfectly centred / is not located in the middle of the black ring. The distance between
-
Hi guys, as you know i just bought a pair of pre-owned N800 and I'm starting to find some problems with them.
It seems the on one of the speakers the rubber seal surrounding the FST drive is tucked under the FST drive at a certain area, thus exposing a white surface that comes behind...
Comment