Hi B&W fans!
How can I remove the front grill from the VM-1 speakers ?
Any help...
Thank you!
How can I remove the front grill from the VM-1 speakers ?
Any help...
Thank you!
-
I just replaced my CM-4 tweeter diaphragm and thought others may benefit from my experience.
Here are my modified directions from Eric at B&W on how to disassemble the tweeter:
1. Remove grille, remove the 6 silver posts that the grill attaches too. Simply unscrew these...04 November 2009, 10:59 Wednesday -
In the thread 'How to replace tweeters on Nautilus and Signature speakers' DM3000 Owner answered my question about replacing tweeters on the Matrix 801 S3 (and S2) as follows:
"I did a Matrix tweeter....
You can do it two ways. Both require removing the tweeter housing.
01 January 2011, 09:05 Saturday -
After years of good service, my front VM1's seem to have been destroyed. OK, they are sometimes driven quite hard but my amp (Sony ST-DB930) only has 100W per channel which would seem a good match to the 100W VM1. Both speakers seem to have been destroyed, and music now sounds like a few grains of... -
This seems ot get asked a lot. It is very easy to do.
Step one, call B&W and order a new tweeter. You will probably have to leave a message. Call back if you do not hear beack in about one week. Specify if you have a Nautilus or Signature speaker.
B&W's number: 800-370-3740... -
Hello all,
I'm always replying to other threads but rarely starting one so here it goes!.
What is your take on speaker grills?. Do you use yours or do you remove them....much to the chagrin of your better half!!??. Are yours ALWAYS off?. I thought of removing mine today and did...
Comment