804S/HTM4 and ASW 750 setup help

[greggz]

I need to help a friend setup his new ASW 750 with his 804S/HTM4 combo this weekend.

His application is strictly 100% Home Theater.

I'm curious if anyone else has this configuration and what your sub settings are?

PRE/PRO SETTINGS
==============
I would assume all speakers set to SMALL.

What do you have the crossover set at in your pre/pro? Do you use a different crossover point for the 804S vs the HTM4? (I'm thinking initially 60Hz for the 804S and 80Hz for the HTM4)


SUB SETTINGS
===========
Low pass frequency setting? (40Hz-180Hz)

EQ: A or B?

Low Pass Filter: In or Out?

Phase: in-phase (0) or out-of-phase (180)?


Thanks in advance for any suggestions we can use as a starting point. :T

[scanido]

I set my 804S x-over at 40Hz. This is because my sub is not that great. When i get a more capable sub i'll set the 804S to something like 50-60Hz.

60Hz sounds about right for the 804S.

I would set the center to 60Hz as well to keep inline with the 804S.

[Boone38]

I have the 804s and the HYM4s with the Velodyne SPL 1200. I have the xover set to 60 as well. I would keep the sub in phase. Allot of times it is best to try different settings as the room will play a large part.