new 800 series unassembly

[valvola]

hello,
I need to remove a new 801d's tweeter from the marlan head, do anyone know how to do it without damage?
Thank you very much!

[akhter]

hello,
I need to remove a new 801d's tweeter from the marlan head, do anyone know how to do it without damage?
Thank you very much!

Please have a digital camera handy and post pics

[krellfan]

Facing the front of the tweeter, rotate the metal rod that's sticking out the back of the tweeter in the counter clock wise direction. It should not require that much force to rotate the rod. Once the rod is loose, push the rod towards the tweeter and the tweeter should move. You can now carefully pull the tweeter out but it will not come out all the way since there are two wires connected to the tweeter. Remove the wires by pulling/rocking the connectors. Don't pull the wires to remove it. Note that one wire is red and it must connect back to the same location on the tweeter.
It should take about 5 minutes to do.

Good luck.

[valvola]

Facing the front of the tweeter, rotate the metal rod that's sticking out the back of the tweeter in the counter clock wise direction. It should not require that much force to rotate the rod. Once the rod is loose, push the rod towards the tweeter and the tweeter should move. You can now carefully pull the tweeter out but it will not come out all the way since there are two wires connected to the tweeter. Remove the wires by pulling/rocking the connectors. Don't pull the wires to remove it. Note that one wire is red and it must connect back to the same location on the tweeter.
It should take about 5 minutes to do.

Good luck.

thank you! your instruction are very accurate: i managed to remove the tweeter in a couple minutes without damage. I wonder what are used the three screws for...

[valvola]

thank you! your instruction are very accurate: i managed to remove the tweeter in a couple minutes without damage. I wonder what are used the three screws for...

I discovered that the three screws are used to hold the dome to the magnet.