entry level cables

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • fredness
    Junior Member
    • Jan 2005
    • 14

    #1

    entry level cables

    If I believe ________s only measurements count to evaluate the performance of speaker cables. They seem to imply resistance, capacitance, and inductance are the significant values that indicate quality. Reading their articles there is not indication they played music through any of the cables tested.
    Of course the system is only as good as the weakest link (connectors and jacks?). I am using a Sony SCD-C333ES cd player and a Pioneer VSX-1014TX receiver (110x7ch MOSFET). I won't be buying a seperate amp anytime soon. I have BESL 5MT and Energy Veritas 2.2 speakers. I want to upgrade my interconnects from Radio Shack/ Monster.

    I am considering Cardas Crosslink, Belden 8214, ______ Cable and I own Sound King 12awg. The Sound King better specs than the Crosslink. Can anyone provide insight on these products? I read that the Cardas sound warm but I don't know if that means they rolloff highs.

    I did order a 14awg x 3 power cable by Volex 17604 to upgrade from stock 18awg cords. For analog I was going for the 89259 (or Crosslink) and digital 1694A. I'm trying to minimize decision paralysis. Any one of these will probably be good enough.
    ----
    This site not endorsed by HTGuide, links deleted.
    ----
    I should have done as much research on cables as I have on my other components. The Radio Shack stuff even seemed expensive to me at the time. My wife would say, these cables aren't broken, you turn on the radio and music comes out, what more do you want? I saw one comment that someone was disappointed with a cd player mod because he expected the heavens to open up and golden notes to come from his speakers. Is that too much to ask?

    Has anyone tried Jon Risch's recommended Belden 8214 as speaker cables?
    Would anyone say that the Crosslink has any undesireable rolloff?
    Thanks for your time.
  • Patt
    Senior Member
    • Feb 2005
    • 922

    #2
    Audioholic's.......... :rofl:
    ......Pat

    Comment

    • Uncle Clive
      Former Moderator
      • Jan 2002
      • 919

      #3
      Hi Fred (Bad, Bad Pat) maybe this will help you as it did me :T



      Thanks
      CLIVE




      HEY!! Why buy movie tickets when you can own a Theater?

      Comment

      • Lex
        Ultra Senior Member
        • Apr 2001
        • 27460

        #4
        The site you linked to is a non-endorsed site of HTGuide, sorry links deleted. Also, please do be aware that this forum is owned by the same company as CATCables.com, as such, a short leash is allowed on all cable posts. Most all members here softly walk around this area, and posts like these come up seldom.

        I'd be glad to answer any questions you have about cables we sell, and as well I have a couple of Belden products around.
        Doug
        "I'm out there Jerry, and I'm loving every minute of it!" - Kramer

        Comment

        Related Topics

        Collapse

        • fredness
          entry level cables
          by fredness
          If I believe _______ speaker cable face off, only measurements count to evaluate the performance of speaker cables. They seem to imply resistance, capacitance, and inductance are the significant values that indicate quality. Reading their articles there is no indication they played music through any...
          16 March 2005, 02:00 Wednesday
        • aud19
          Interconnects - Cardas vs. Belden
          by aud19
          Anyone have an opinion on whether the Cardas Crosslink is worth 3.5 times the Belden 89259? I'm having a dilemna with that. I'm planning on purchasing the raw materials and putting the cables together myself. (Any helpful hints on that subject would be greatly appreciated as well.) Also to aid in...
          26 September 2003, 17:54 Friday
        • Claude D D
          Belden 89259 DIY speaker cable
          by Claude D D
          I finnished building my first set of cross connected Belden 89259 speaker cables on Apr9.They took about 3 hrs to make and cost $125 CDN (approx $78 US).I had been using Kimber 8TC.Upon installing the new cables in place I immediatly noticed a more layered soundstage,more detail and tighter deeper bass...
          11 April 2003, 13:00 Friday
        • Whitman
          New Cables make me Happy!
          by Whitman
          Well I broke down and made new cables. I was going to buy CatCables but the exchange was the back breaker. Now I have a nice pair of Belden 89259/Neutrik for audio and Belden 1695/Canare for Component and Digital audio[whenever I get my 1055]. It's going to be fun breaking them in!

          Scope!...
          03 February 2003, 18:58 Monday
        • Horacio
          Cables for 804S + tubes?
          by Horacio
          I'm starting my search into speaker cables for my 804S driven by McIntosh MC275 and would very much appreciate members' insight into what has work for them.

          We all know these threads weren't allowed until now, and this is sort of an experiment, so let's behave! :T
          Please note...
          09 September 2009, 20:26 Wednesday
        • Loading...
        • No more items.
        Working...
          Searching...Please wait.
          An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

          Please push the back button and reload the previous window.'
          An unexpected error was returned: 'Your submission could not be processed because the token has expired.

          Please push the back button and reload the previous window.'
          An internal error has occurred and the module cannot be displayed.
          There are no results that meet this criteria.
          Search Result for "|||"