For information, VituixCAD speaker simulator has been updated from version 1.1 to 2.0 with the following additions and changes (so far):
More information in changelog, user manual and software page.
- Crossover schematic changed from formal block ladder to free form supporting unconventional topologies.
- Predefined passive blocks replaced with individual LCR components, wire, ground, generator and library blocks. Passive components have some new parameters; ESR, DCR, wire diameter, power.
- Library blocks can be "smart" with parameters asked from user, option menu, variables and mathematical expressions for calculating component values by user parameters and selected filter option such as Butter, Bessel or L-R. User can add and maintain own custom blocks. Block parameters are saved to project file. Math expressions can be located in parameters of components too.
- Operational amplifier added. Many library blocks are OP stages.
- Max. amount of different driver models is 100 in a project. Amount of off-axis responses for each driver model is unlimited, but in practice 718 is maximum because of two planes and off-axis angle is integer value.
- Amount of driver instances in crossover is close to unlimited. Drawing sheet area limits in practice.
- Width of crossover schematic and graphs is adjustable with splitter control.
- Smoothing of frequency responses.
- Zooming In/Out/Fit/100% of crossover schematic.
- Optional snap grid for schematic.
- Separate schematic preview window removed.
- Parts list changed to grid. New data: R.Pow, C.ESR, L.DCR, L.wire dia and drivers.
- Optimizer, Impulse response and Power dissipation windows, file exports and few graphs adapted for free form schematic which doesn't have "Ways" anymore.
- Box dimensions by volume and thickness added to Auxiliary calculator.
- LMS short ascii response file support added.
More information in changelog, user manual and software page.
Comment