I currently have a Fosgate FAP T1+. Just bought and returned an onkyo 885P (same as the integra 9.8) in hopes of obtaining the ability to decode the new HD audio formats. Anyway, I learned a valuable lesson, if a pre pro has a good preamp section you can let the bluray player decode the new formats. I returned the onkyo because, the fosgate sounded better via 7.1 input. I am looking into picking up a used SSP-300. I searched this forum and located a post that stated the SSP-300 does not apply any level or distance parameters for 7.1 input. When I reviewed the Classe manual, it seems to state the opposite. Can someone confirm which is correct?
Quote from manual (Page 28) In the SSP-300, these signals are passed through to the speakers with no further processing, in order to preserve the purity of the signal. When this input is selected, the SSP-300 provides only volume control (including the volume offsets used to balance all your loudspeakers to one another)."
Quote from manual (Page 28) In the SSP-300, these signals are passed through to the speakers with no further processing, in order to preserve the purity of the signal. When this input is selected, the SSP-300 provides only volume control (including the volume offsets used to balance all your loudspeakers to one another)."
Comment