Well, here we go! This will be the first phase of the on-wall fireplace surround project that I first brought up in this thread: http://www.htguide.com/forum/showthr...n-wall-project. Many, many thanks to ---k--- and cjd for their great designs and their patient advice to a complete noob. ;x( I'm hoping for lots more feedback from them and anyone else who wants to chime in as I try to pull this off.
Here is my starting AutoCAD model for a quick sanity check and verification of my volume calculations. I have not yet modeled the braces, rabbets, etc.:
Showing the dimensions of the MT enclosure was too confusing - it measures 12.1x28.2x14.6 internally, giving me 4.98L. The outer box is 26.2x28.2x66.2 internally, which is 45.36L. Subtracting 7.3L for the outer volume of the MT box and another ~2-3L for the braces should leave me right at 35L. Looks pretty good so far based on the following from Ryan's original Khancenter thread:
Everything look generally OK so far? Do I need to allow more volume for the drivers and XO's? I'd like to stay with the proposed height and depth, but could easily go wider.
Don
Here is my starting AutoCAD model for a quick sanity check and verification of my volume calculations. I have not yet modeled the braces, rabbets, etc.:
Showing the dimensions of the MT enclosure was too confusing - it measures 12.1x28.2x14.6 internally, giving me 4.98L. The outer box is 26.2x28.2x66.2 internally, which is 45.36L. Subtracting 7.3L for the outer volume of the MT box and another ~2-3L for the braces should leave me right at 35L. Looks pretty good so far based on the following from Ryan's original Khancenter thread:
Originally posted by ---k---
Don
Comment