XO's are not my forte for building and I was hoping to enlist somebodies help with a centre channel MTM. Box will be .75 cu/ft with external dimensions of 19x18x13 sealed using 3/4" mdf. If anybody is willing to help below is a listing of parts I have. Was hoping not to buy more components but if needed I could. If the total project could be 4 ohms or higher it would be nice. Centre would be placed in a TV stand if that helps. Open back stand so open to suggestions to porting.
Parts are:
Woofers
2 x RS180s-4
Tweeter
1 X 27TDFC
Inductors
2 x .39mH 14awg, 0.12ohms DCR, 16mm H x 64mm D
2 x 1.5mH 18awg, 0.60ohms DCR, 14mm H x 57mm D
Capacitors
8 x 24mfd 250v, 0.0005ohms DF, 30mm D x 43mm L
2 x 30mfd 250v, 0.0006ohms DF, 31mm D x 48mm L
2 x 8.2mfd 250v, 0.0003ohms DF, 21mm D x 33mm L
Resistors
2 x 2 ohms 10w
2 x 8 ohms 10w
2 x 10 ohms 10w
2 x 5 ohms 10w
Anybody willing to help would be greatly appreciated or any input of course is appreciated also. ;x(
Parts are:
Woofers
2 x RS180s-4
Tweeter
1 X 27TDFC
Inductors
2 x .39mH 14awg, 0.12ohms DCR, 16mm H x 64mm D
2 x 1.5mH 18awg, 0.60ohms DCR, 14mm H x 57mm D
Capacitors
8 x 24mfd 250v, 0.0005ohms DF, 30mm D x 43mm L
2 x 30mfd 250v, 0.0006ohms DF, 31mm D x 48mm L
2 x 8.2mfd 250v, 0.0003ohms DF, 21mm D x 33mm L
Resistors
2 x 2 ohms 10w
2 x 8 ohms 10w
2 x 10 ohms 10w
2 x 5 ohms 10w
Anybody willing to help would be greatly appreciated or any input of course is appreciated also. ;x(
Comment