Tweet
I had a guy I know do the crossover for the statements center for me. Here is a picture of the finished crossover.... wondering if it looks right? I will get some more pictures of it later.
Attached Files
-
-
The construction looks fine. From the pic I can't tell if its wired correctly or not, but judging from the apparent forethought he put into it, I'd guess it is likely wired OK as well.
C -
Thanks Curt.Comment
-
-
Care to explain your comment?Originally posted by MT Speakers
IB subwoofer FAQ page
"Complicated equipment and light reflectors and various other items of hardware are enough, to my mind, to prevent the birdie from coming out." ...... Henri Cartier-BressonComment
-
The guy took the picture of the crossover and has not sent me the actual crossover in the mail yet. I am in Iowa and he is not from Iowa.Comment
-
Why would you ask someone you have confidence in, to build something and then insult the person by asking a bunch of lurkers if it is built ok?.Comment
-
If you consider the designer of the network in question "a bunch of lurkers," why are you here? An MD has quite a bit more experience in the medical field than I do, but if he makes a diagnosis on something as serious as a crossover, I'm getting a second opinion. And he better not be insulted.Comment
-
-
Anymore of this nonsense and people are going to lose their posting privileges...
IB subwoofer FAQ page
"Complicated equipment and light reflectors and various other items of hardware are enough, to my mind, to prevent the birdie from coming out." ...... Henri Cartier-BressonComment
-
OK Thomas, My dad tells me I am bad. I apologize for questioning nonsense.Comment
-
I have confidence in the guy who made the crossover... I am just double checking it was done right.Comment
-
It look like some of those resistors are parallel. I'm assuming that was done to reduce the inductance. If so, that is a really great idea. I wish I had done that with my crossover. :cry:Attached FilesComment
-
-
-
Curt is who i wanted to look at the crossover I could have just PM'd him.Last edited by 06'goat; 13 April 2009, 20:09 Monday.Comment
-
Well the guy that built the crossover is darn good. I tried using heat shrink tubing and just burnt up the first crossover I made. So on the crossovers you see, I did not use any heat shrink tubing. So when I saw your cross over I thought there was a lot of good stuff here.Comment
-
Yeah, see i know nothing about crossovers so i wanted a second opinion from curt.Comment
-
Well, it's time you expanded your horizons!Originally posted by 06'goat
Give this article a read:
Verifying that the actual crossover is wired as intended is fairly easy. Just take it a section at a time, and holler if you have any questions...
CComment
-
Great read!Originally posted by Curt CWell, it's time you expanded your horizons!
Give this article a read:
Verifying that the actual crossover is wired as intended is fairly easy. Just take it a section at a time, and holler if you have any questions...
CDIY - once you start down that (dark) path, forever will it dominate your destiny!Comment
Comment