After finishing my first ever DIY project as a gift to my dad (ZDT3.5s), I decided it was time for me to build something for myself!
Images not available
External dimensions (22"h x 17.5"w x 25"d)
Internal dimensions (20.5"h x 16"w x 22"d)
I calculated 4.176 cu ft not including the bracing and driver. I am going to use a 4" precision port with an o-audio 500w plate amp and a shiva-x.
The next step is damping material.. I see that many people use regular old fiberglass insulation on the walls. Is there anything I should consider when doing this (thickness of insulation, paper back left on, etc)?
First DIY sub, be gentle
Images not available
External dimensions (22"h x 17.5"w x 25"d)
Internal dimensions (20.5"h x 16"w x 22"d)
I calculated 4.176 cu ft not including the bracing and driver. I am going to use a 4" precision port with an o-audio 500w plate amp and a shiva-x.
The next step is damping material.. I see that many people use regular old fiberglass insulation on the walls. Is there anything I should consider when doing this (thickness of insulation, paper back left on, etc)?
First DIY sub, be gentle
Comment