First of all I want to thank Madisound for their help here. They were kind enough to send me measurements etc.
So here we go:
(I have the drivers)
I have 2 of the PE .75 cu, ft. curved boxes (baffle = 17'' x 10'') and I propose a 2-way with the Eton 8-800 woofer with the Morel MDT-30S tweeter. I used BaseBox Pro to come up with a port size of 2'' x 6'' that will give me Fb= 35Hz / F3= 51.4.
The crossover:
I sure would appreciate it if someone could check this for me so I don't waste alot of time and money on parts for something that will not bring the best out in these drivers.
Much thanks
So here we go:
(I have the drivers)
I have 2 of the PE .75 cu, ft. curved boxes (baffle = 17'' x 10'') and I propose a 2-way with the Eton 8-800 woofer with the Morel MDT-30S tweeter. I used BaseBox Pro to come up with a port size of 2'' x 6'' that will give me Fb= 35Hz / F3= 51.4.
The crossover:
I sure would appreciate it if someone could check this for me so I don't waste alot of time and money on parts for something that will not bring the best out in these drivers.
Much thanks
Comment