First want to thank all you guys for answering my questions in my first post I finally figured out that setup and I'm very happy with the output, just not the sound quality.(with the sub) It seems muddy or maybe one toned, can't really explain but I'm sure proper drivers would make a world of difference. Now I can use what I have and be happy with it till I build a new setup. Here's what I was thinking of going with but I'm not sure on which would give me a more accurate response.
The amp will be an EP1500, I upgraded the A500 to this before the 2 week period was up. They didn't have a EP2500 in stock so this is what I have.
I also bought a MIC2200 for the SSF which is set to 12hz. (lowest setting) And preamp.
Here's a picture of my setup right now so you get the idea of the room layout and speaker placement.
I was thinking either 2 Tempest-X or one Maelstorm-X, would I have enough power to drive either of these to a reasonable volume?
I was thinking about going with a ported enclosure tuned to 16hz, would this be about right for Home Theater use? Or would a sealed box get me better/more accurate bass?
I have approx 16.25 ft^3 to work with internal volume to work with under my screen. This would be with 3/4" material and a 1 1/2" front baffle, this is also not including internal bracing, drivers or port. Guessing approx 14.5 after all that?
Any suggestions or recomendations would be great, not in a big rush but wouldn't mind ordering drivers ect in the next few weeks.
Thanks
Clinton
The amp will be an EP1500, I upgraded the A500 to this before the 2 week period was up. They didn't have a EP2500 in stock so this is what I have.
I also bought a MIC2200 for the SSF which is set to 12hz. (lowest setting) And preamp.
Here's a picture of my setup right now so you get the idea of the room layout and speaker placement.
I was thinking either 2 Tempest-X or one Maelstorm-X, would I have enough power to drive either of these to a reasonable volume?
I was thinking about going with a ported enclosure tuned to 16hz, would this be about right for Home Theater use? Or would a sealed box get me better/more accurate bass?
I have approx 16.25 ft^3 to work with internal volume to work with under my screen. This would be with 3/4" material and a 1 1/2" front baffle, this is also not including internal bracing, drivers or port. Guessing approx 14.5 after all that?
Any suggestions or recomendations would be great, not in a big rush but wouldn't mind ordering drivers ect in the next few weeks.
Thanks
Clinton
Comment