Greetings all,
I am currently in the process of building a set of Jon's Modula MTM speakers, and as a crossover building newbie I am a bit lost. The pictures in the build thread clearly show the low and partial high pass boards, but the pic of the zoebel board is obscured by the cabinet. If anyone has a better picture, or a line drawing---(Unfortunatly I am having difficulty understanding the schmatic). Any wiring diagram would also be helpful.
I have attached pictures of my high and low pass boards for critique, but as you can see I am totally stuck on the layout and wiring on the last. The only changes I made to the original design were to use a 15 uf Clarity Cap SA for C 5 instead of Jons bundle. Also L5 is a 15 guage Perfect Lay instead of the 20ga. shown in the plans. (PE was out on their tent sale day)(hopefully the larger is better approach will work here with no ill effects). C6 is built from a Solen, an Audiocap Theta, and a Kimber cap. I would also like to know how critical C9 is to the overall picture, as I have a Solen, but I could easily upgrade it.
A woodworker friend did a fantastic job on the cabinet cutouts.
I want to get these done soon, as I already have the cabinet, RS 52, D26CN, to start the Neo center channel. I am just waiting for Jon's final opinion as to any differences between the Hi-Vi and RS-180 versions sound quality when finished.
Associated equipment will be a Parasound Pre-Pro and 5 channel amp.
When they are finished and broken in, I will take them to an Audiophile friends home and try them on his dream system that has a 10k + Linn turntable, and 50K Wavac amps. Will be interesting to see how they hold up against his Opera and Odian speakers. I also hope the 4 ohm taps on the Wavacs are friendly with the Modula's impedence.
Any help for a total x-over newbie would be greatly appreciated.
I am currently in the process of building a set of Jon's Modula MTM speakers, and as a crossover building newbie I am a bit lost. The pictures in the build thread clearly show the low and partial high pass boards, but the pic of the zoebel board is obscured by the cabinet. If anyone has a better picture, or a line drawing---(Unfortunatly I am having difficulty understanding the schmatic). Any wiring diagram would also be helpful.
I have attached pictures of my high and low pass boards for critique, but as you can see I am totally stuck on the layout and wiring on the last. The only changes I made to the original design were to use a 15 uf Clarity Cap SA for C 5 instead of Jons bundle. Also L5 is a 15 guage Perfect Lay instead of the 20ga. shown in the plans. (PE was out on their tent sale day)(hopefully the larger is better approach will work here with no ill effects). C6 is built from a Solen, an Audiocap Theta, and a Kimber cap. I would also like to know how critical C9 is to the overall picture, as I have a Solen, but I could easily upgrade it.
A woodworker friend did a fantastic job on the cabinet cutouts.
I want to get these done soon, as I already have the cabinet, RS 52, D26CN, to start the Neo center channel. I am just waiting for Jon's final opinion as to any differences between the Hi-Vi and RS-180 versions sound quality when finished.
Associated equipment will be a Parasound Pre-Pro and 5 channel amp.
When they are finished and broken in, I will take them to an Audiophile friends home and try them on his dream system that has a 10k + Linn turntable, and 50K Wavac amps. Will be interesting to see how they hold up against his Opera and Odian speakers. I also hope the 4 ohm taps on the Wavacs are friendly with the Modula's impedence.
Any help for a total x-over newbie would be greatly appreciated.
Comment