Starting a thread for my Modula MTM build. Not much to see yet, but more is on the way soon! :T
Finished a set of crossovers so I thought I'd do a quick smoke test. Hooked everything up with alligator clips and played a test CD I made with tones from 100Hz - 12KHz. Played the low-pass/high-pass separately then put them together. Sounds like everything is working, although the crossover attenuation isn't as dramatic as I thought it would be. Going to hook up a wavetek signal generator (or maybe just a laptop) and my ECM8000 mic this week to take some measurements. Are free-air measurements even worth anything or should I wait to put them in a baffle/full box?
Image not available
Finished a set of crossovers so I thought I'd do a quick smoke test. Hooked everything up with alligator clips and played a test CD I made with tones from 100Hz - 12KHz. Played the low-pass/high-pass separately then put them together. Sounds like everything is working, although the crossover attenuation isn't as dramatic as I thought it would be. Going to hook up a wavetek signal generator (or maybe just a laptop) and my ECM8000 mic this week to take some measurements. Are free-air measurements even worth anything or should I wait to put them in a baffle/full box?
Image not available
Comment