I have 2 Mach5 audio MAW-15 on the way
Power Handling: 500 Watts
SPL (2.83v/1m): 90.2 db
Impedence: 4 + 4 Ohm
T/S parameters (with coils wired in series):
Fs = 26 Hz
Re = 8 Ohms
Qt = 0.32
Qes = 0.35
Qms = 3.35
Mms = 232.8 grams
Rms = 11.42 kg/s
Cms = 0.000159 m/N
Vas = 129 liters
Sd= 756.3 cm2
Xmax = 13 mm
Diameter = 31.1 cm
Dimensions
Outside Diameter: 39.4cm (15 1/2")
Mounting Diameter: 35.6cm (14")
Depth: 16.8cm (6 5/8")
And I have a Tapco J-800 power amp
I would really appreciate some advice on what kind of cabinet to put them. My room is a dedicated hometheater 18x24, IB is not an option, I don't mind sonotubes, but I would rather build a single large box.
I was thinking 350-400l tuned to 17.5hz. I have been playing with WinISD, but to be honest I don't understand half of the graphs.
This forum is amazing and I can't wait to get started on my first DIY project.
Thanks
Power Handling: 500 Watts
SPL (2.83v/1m): 90.2 db
Impedence: 4 + 4 Ohm
T/S parameters (with coils wired in series):
Fs = 26 Hz
Re = 8 Ohms
Qt = 0.32
Qes = 0.35
Qms = 3.35
Mms = 232.8 grams
Rms = 11.42 kg/s
Cms = 0.000159 m/N
Vas = 129 liters
Sd= 756.3 cm2
Xmax = 13 mm
Diameter = 31.1 cm
Dimensions
Outside Diameter: 39.4cm (15 1/2")
Mounting Diameter: 35.6cm (14")
Depth: 16.8cm (6 5/8")
And I have a Tapco J-800 power amp
I would really appreciate some advice on what kind of cabinet to put them. My room is a dedicated hometheater 18x24, IB is not an option, I don't mind sonotubes, but I would rather build a single large box.
I was thinking 350-400l tuned to 17.5hz. I have been playing with WinISD, but to be honest I don't understand half of the graphs.
This forum is amazing and I can't wait to get started on my first DIY project.
Thanks
Comment