Hi there, first post on this board. Im building a coffee-table/speaker. I plan on putting a Soundsplinter RL-p15 in there with a Behringer EP1500 on it. Im going to be giving it 4.5 to 5 cubes, tuned to 16hz. Obviously I don't want this to be a HUGE table...which brings me to my question. Im torn on how much port surface area to use. Obviously I don't want port noise, but I'm also slightly limited on space. What is the bare-minimum surface area I should be giving this/these ports? I was contemplating using If I use PVC I don't know whether to use 1 or 2 ports. Im assuming 1 4" PVC pipe is not nearly enough...so I thought about 2. Im also debating on making a slot port...again I don't know how big. Either way, I plan on beginning construction on Tuesday.
I also have one more question. Im building this out of MDF, and I was planning on using a black lacquer to finish it. What kind of primer/sealer do I need to use to obtain a good finish?
Thanks for any help,
Shaun
I also have one more question. Im building this out of MDF, and I was planning on using a black lacquer to finish it. What kind of primer/sealer do I need to use to obtain a good finish?
Thanks for any help,
Shaun
Comment