Hi,
I want to build myself a pair of floorstand speakers, and I need your help!
First I should describe what I want: a 2-way floorstand, vented,
using an 8" woofer with a conventional tweeter.
The volume of the box should be ~40-50L with the tuning frequency at FS, for best transient response! The F3 should be around 30Hz!
The problem is where should I cross with the tweeter, low(~1,2khz) or
high(over 2khz)?
Crossing low needs a Cauer Filter, and an waveguide. The Cauer filter
has bigger Group Delay, but it's very steep after XO point!
Crossing high needs a good woofer, high BL/MMS ratio, good off-axis,
low IM distorsion, etc.
I don't have a big budget so I can spend at most ~240E for the woofer and tweeter!
Do you have any suggestions, for the woofer/tweeter pair, XO point, enclosure/filter alignment?
Thanks!
I want to build myself a pair of floorstand speakers, and I need your help!
First I should describe what I want: a 2-way floorstand, vented,
using an 8" woofer with a conventional tweeter.
The volume of the box should be ~40-50L with the tuning frequency at FS, for best transient response! The F3 should be around 30Hz!
The problem is where should I cross with the tweeter, low(~1,2khz) or
high(over 2khz)?
Crossing low needs a Cauer Filter, and an waveguide. The Cauer filter
has bigger Group Delay, but it's very steep after XO point!
Crossing high needs a good woofer, high BL/MMS ratio, good off-axis,
low IM distorsion, etc.
I don't have a big budget so I can spend at most ~240E for the woofer and tweeter!
Do you have any suggestions, for the woofer/tweeter pair, XO point, enclosure/filter alignment?
Thanks!
Comment