Cinemeek Doings

**Lex** · 06 January 2003, 23:52 Monday

Looking good there David! Well, you have to work so much, it's no wonder your not done. It will happen, eventually.

Put a hammer in those assistant's paws!

Goodluck,
Lex

**efarstad** · 07 January 2003, 00:42 Tuesday

Looking great David...before long you'll be listening to the THX Intro baby!

E

The Norwegian A/V Nut!
E-Cinema

**John Holmes** · 07 January 2003, 09:25 Tuesday

Uh...yeah, what they said! :LOL: Looking good David!

"I came here, to chew bubble gum and kickass. And I'm all out of bubble gum!!!" My DVD's

**George Bellefontaine** · 07 January 2003, 12:53 Tuesday

Hey, Tex, your able assistants look bored... :LOL: I think they want to see a movie.

My Homepage!

**Andrew Pratt** · 07 January 2003, 14:15 Tuesday

What are your plans for wall treaments etc? What about colours and other goodies?

**David Meek** · 08 January 2003, 10:48 Wednesday

I think they want to see a movie.

Travis, the big black one (110 lbs.) doesn't really like the theater room, but Cosmo will occasionally come in and watch movies with us.

Pr@, Gloss black, or mahogany stained trim (haven't decided on that yet) with deep burgundy walls and ceiling. There will be a strip of pleated burgundy fabric running from about 8" off the floor up to about 46" from the floor that'll be capped on top and bottom and run all the way around the room. The top cap will act as a small shelf to hold drink glasses (this fabric will be a good cover for any diffusers or absorptive panels). The door for the equipment will be glass (deep bronze tint) with wood frame. The entry door is a mahogany French door with matching sidelights.

David - HTGuide flunky
Our "Theater"
Our DVDs on DVD Tracker

**Andrew Pratt** · 08 January 2003, 11:07 Wednesday

Sounds very elegent! The gloss black would be stronger then a flat paint but watch out for reflections :cry:

**David Meek** · 08 January 2003, 13:32 Wednesday

The gloss black would be stronger then a flat paint but watch out for reflections :cry:

I'm kinda leaning towards the mahogany stain as that way the trim would match the French door and sidelights. But the black would look way cool IMHO, and also would be faster as I could just repaint the existing trim and not have to replace it all so that it could be stained. Decisions, decisions.
:banghead:

David - HTGuide flunky
Our "Theater"
Our DVDs on DVD Tracker

**David Meek** · 11 January 2003, 18:48 Saturday

Here's a few more up-to-date shots.

01) The main wall after sheetrocking
02) The equipment closet after sheetrocking
03) A wall sconce (lighting) outlet
04) The cabinet housing the RPTV from the master closet side - upper part
05) The cabinet from the closet side again - lower part

David - HTGuide flunky
Our "Theater"
Our DVDs on DVD Tracker

**efarstad** · 11 January 2003, 19:13 Saturday

Looking great David! Very clean lines....nice work! :T

E

The Norwegian A/V Nut!
E-Cinema

**Trevor Schell** · 11 January 2003, 21:46 Saturday

Looking Good David!,
I wish I had that kind of talent! :amen:

Trevor
My HomeTheater S.E.
Sonically Enhanced
C5

**David Meek** · 27 January 2003, 20:16 Monday

Spent part of the weekend working on finishing the closet-side up. Got everything built (excluding doors) and finished filling/sanding. It's ready for me to prime and paint. The cabinet located farthest away is the equipment rack. Above the component area is more storage.

David - HTGuide flunky
Our "Theater"
Our DVDs on DVD Tracker

**Lex** · 27 January 2003, 21:14 Monday

Nice work Deek!

Lex

Cable Guy DVD Collection

**Andrew Pratt** · 28 January 2003, 14:07 Tuesday

Nice work david..are all your tools that shade of yellow?

**David Meek** · 28 January 2003, 16:01 Tuesday

That'd be Mr. Deek to you, buddy!

:

Pr@, I wish. DeWalt makes GOOD stuff. Right now that little sander and my new double-bevel compound miter saw are DeWalts. Here's my new toy:

It's a good complement to my radial-arm saw - especially for 6 5/8" molding that the radial won't handle.

David - HTGuide flunky
Our "Theater"
Our DVDs on DVD Tracker

**Andrew Pratt** · 29 January 2003, 15:35 Wednesday

Nice toy david...i wish my tools were DeWalts instead of cheapies.

**Burke Strickland** · 06 February 2003, 22:35 Thursday

So, when do we get another CinePeek? :>) Has it been all work and no play, er, "home work" the past couple of weeks? :>)

Burke

**David Meek** · 07 February 2003, 08:20 Friday

No play lately Burke.

This weekend ought to be good though. Rainy and cold - no outside activities. Lot's of time to tape and float sheetrock.

David - HTGuide flunky
Our "Theater"
Our DVDs on DVD Tracker

**David Meek** · 10 March 2003, 09:14 Monday

Finally. Got to do some work on Cinemeek yesterday. I decided on a modification that is similar to one that I put in the theater room at the old house - an overhead media rack that will hold my albums and DVDs. Not sure what to do about the CDs yet as I'm running out of room. What you see here is the sheetrock has been cut out above the RPTV cavity and equipment closet areas and the 2"x12" shelf for the albums going in. The DVDs will go under the albums - you can see the smaller shelf risers for the upper DVD shelf below the 2"x12". Considering there will be 500-600 albums sitting on this shelf, it HAD to be coupled directly to the studs!

01) My able-bodied assistant (Aaron) slaving away
02) Wide shot of wall. We've done enough for today - the pizza's here.

One added benifit: there won't be nearly as much taping/floating/texturing to do.

David - HTGuide flunky
Our "Theater"
Our DVDs on DVD Tracker

**George Bellefontaine** · 10 March 2003, 11:53 Monday

Tex, that's a great idea for a media rack. Think of all that floor space it saves. Floor space is a real problem for me with my growing dvd collection, so I just may follow your idea through.

My Homepage!

**David Meek** · 11 March 2003, 09:07 Tuesday

Thanks George. This worked out really well in our old house for the albums so I thought I'd expand it as I'm in a smaller room now.

David - HTGuide flunky
Our "Theater"
Our DVDs on DVD Tracker

**David Meek** · 25 March 2003, 09:22 Tuesday

Hadn't done much on the room what with the new equipment arriving (and having to test it

) and then going on vacation for a week. But last night saw a bit of progress. I got the DVD portion of the media rack roughed-in:

01) rough-finished rack

Now, to start trimming it. . .

David - HTGuide flunky
Our "Theater"
Our DVDs on DVD Tracker

**David Meek** · 07 April 2003, 08:10 Monday

Now that I've had a bit of time to play with the new toys, I mananged to get some trim work in on Cinemeek yesterday. Nothing worth a photo yet, but maybe tonight.

David - HTGuide flunky
Our "Theater"
Our DVDs on DVD Tracker

**David Meek** · 10 April 2003, 09:11 Thursday

Got the DVD portion of the media cabinet trimmed out last night. Will try to finish the album section above it tonight or tomorrow night. When that's complete, then the (cough, spit) fun starts. Filling and sanding - YUCK.

David - HTGuide flunky
Our "Theater"
Our DVDs on DVD Tracker

**George Bellefontaine** · 10 April 2003, 10:47 Thursday

Tex, all I can say is WOW !

My Homepage!

**Eduardo** · 10 April 2003, 22:06 Thursday

Great job Meek. how are you attaching the back boards?

http://home.nc.rr.com/ejimenez

**David Meek** · 11 April 2003, 06:56 Friday

Thanks guys!

Eduardo, the backers are glued (carpenter's glue) and nailed to studs with #3 finishing nails. I had to put a nailer on one end of each opening to support the backer boards. Used a 2"x2" cut-to-length for that.
Didn't get anything done last night. Wound up going out with friends for a steak dinner. Yummy! :drool: Won't get much done tonight either, as it's my daughter's Spring drill team/dance recital. Saturday though. . . .

David - HTGuide flunky
Our "Theater"
Our DVDs on DVD Tracker

**David Meek** · 29 May 2003, 14:10 Thursday

Allrighty then! My sis-in-law (the taping/floating talented one) is coming over Saturday to teach me the right way to finish off the sheetrock work in the HT room. Signs of life . . .

David - HTGuide flunky
Our "Theater"
Our DVDs on DVD Tracker

**David Meek** · 02 June 2003, 07:14 Monday

The first coat of mud 'n tape is on and will be dry enough to sand this evening. (cough, cough)

David - HTGuide flunky
Our "Theater"
Our DVDs on DVD Tracker

**Eduardo** · 02 June 2003, 09:11 Monday

Hope you have a good shopvac and always wear a mask.

http://home.nc.rr.com/ejimenez

**David Meek** · 02 June 2003, 10:04 Monday

Oh yeah, I've got the shop vac ready and I wear good masks. Can't replace the lungs, you know?

David - HTGuide flunky
Our "Theater"
Our DVDs on DVD Tracker

Cinemeek Doings

Cinemeek Doings

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Related Topics