RX-1052 Rec & use of B Speakers

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • Club1820
    Senior Member
    • Jan 2006
    • 269

    RX-1052 Rec & use of B Speakers

    I have a Rotel RX-1052 Stereo Receiver that has both a Zone 2 out and connections for a second set of speakers "B". For ease of set-up, I was considering just using the "B" speaker connection instead of the Zone 2.

    Is there any disadvantage "power" -wise to going this route? What happens to the stated 100 watts per channel when using the "B" speaker connection? Does the power get distributed evenly to all 4 channels, thus diminishing the stated output to the main channels?

    Thanks in advance for any responses.
    Rotel 1068, Rotel 1060, Rotel 1055, Rotel 1095, Rotel 956, Rotel RLC-1040, M&K VX-860 Sub, Whatmough M30s, Squeezebox 3
  • Club1820
    Senior Member
    • Jan 2006
    • 269

    #2
    No one knows the answer to this one? Not even Kevin?

    :cry:
    Rotel 1068, Rotel 1060, Rotel 1055, Rotel 1095, Rotel 956, Rotel RLC-1040, M&K VX-860 Sub, Whatmough M30s, Squeezebox 3

    Comment

    • hifiguymi
      Super Senior Member
      • Mar 2007
      • 1532

      #3
      There is a big difference between the "B" speaker outputs and the zone 2 output.

      With the zone 2 it's a line level output only. You need a separate amplifier (like an RB-1050 for example) for it to work and it would give you separate control over what source you listen to and what volume you listen at. Zone 2 is like having an extra basic preamp in the receiver (the same goes for zone 3 and zone 4).

      If you use the speaker "B" output, you don't have separate volume control of each pair of speakers if they are on at the same time unless you get a passive rheostat type volume control. That will diminish the sound quality quite a bit. As far as amplifier power goes, it doesn't really get divided up. If the two pair of speakers are different, they probably have different sensitivity ratings. When that happens, the more sensitive speaker will play louder. If they are in the same room, the system will play louder just because of more drivers and more surface area. If you have two pair of speakers playing at the same time, the impedance will drop so the power output will go up from the receiver. If they are different speakers, the impedances will be different and that will effect what speaker is using more of the available power.

      I know this is a long winded post, but I hope it helps a little.

      Eric

      Comment

      • Kevin D
        Ultra Senior Member
        • Oct 2002
        • 4601

        #4
        Originally posted by Club1820
        No one knows the answer to this one? Not even Kevin?

        :cry:
        Sorry, out of town for a bit. Eric summed it up pretty good.

        Kevin D.

        Comment

        Working...
        Searching...Please wait.
        An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

        Please push the back button and reload the previous window.'
        An unexpected error was returned: 'Your submission could not be processed because the token has expired.

        Please push the back button and reload the previous window.'
        An internal error has occurred and the module cannot be displayed.
        There are no results that meet this criteria.
        Search Result for "|||"