Im using HOLMimpulse to measure my new DIY build and Im just confused on what to really do.
Generally, I use a DCX, I get some simple calcs for The CTC from experts, I plug in numbers, set crossovers. Measure with ARTA to get a smooth response in room and it ends there.
This time I want to do it better.
So I would love a list for what I should be measuring then what do I do with the measurements.
My build thread is over on AVS but a great deal of expertise is here.
Here are my first measurements, tweeter and woofer done independantly but show on one chart.
Image not available
The measurements are in room but I have 4" thick acoustical panels behind the speaker and on the floor infront of the speaker to help with reflections. I believe the measurements are gated too.
The speaker being measured is this speaker..
Image not available
Its the QSC Waveguide/BMS 4550 CD, TD12M woofer.
Edit by moderator to add link to HOLMImpulse users guide. Note it's a 18 meg pdf
Generally, I use a DCX, I get some simple calcs for The CTC from experts, I plug in numbers, set crossovers. Measure with ARTA to get a smooth response in room and it ends there.
This time I want to do it better.
So I would love a list for what I should be measuring then what do I do with the measurements.
My build thread is over on AVS but a great deal of expertise is here.
Here are my first measurements, tweeter and woofer done independantly but show on one chart.
Image not available
The measurements are in room but I have 4" thick acoustical panels behind the speaker and on the floor infront of the speaker to help with reflections. I believe the measurements are gated too.
The speaker being measured is this speaker..
Image not available
Its the QSC Waveguide/BMS 4550 CD, TD12M woofer.
Edit by moderator to add link to HOLMImpulse users guide. Note it's a 18 meg pdf
Comment