question about Statements build

[RobertT]

Hello , I am new to the forum and came across it in my research for building a
new set of speakers .

I am going to build the statements full sized , I am having a friend that owns a cbinet shop cut the wood for me .

My question is when he routes for the speakers to set flush in the front baffle , how deep does he go ?

or what is the depth of the flange on the speakers used for this build ?

I am doing all my woodwork first and then going to buy my components since
it will be easier on the wallet that way .

Hope somebody can help me , and thank you.

[BOBinGA]

The flange depth is shown in the spec sheet for each driver. You might add a 1/32" for the thickness of the gasket tape since that is not included on most drivers. But its still best to get the drivers and measure them yourself. The spec sheet are usually pretty good, not always. The same thing goes for the outside diameter and cutout diameter.

-Bob

[ratchetfps]

Bob's correct, the spec sheets give you the details. Here's an example:

http://www.parts-express.com/pdf/295-374s.pdf

You can find them on parts express on the right side under "Manuals/Resources"

[RobertT]

Thanks guys I did exactly that , but the specs for the Daytons doesn't load , nothing comes up when I hit the spec sheet button , Now I did get the specs for the TB's with no problem , maybe a PE server problem ?

[RobertT]

Ok , Got the Dayton Specs , Now working on the Fountek specs , all seems good