Am i in the process of building a new sub with a drawing provided by a fellow member of another forum and i have drawn the cut list and would appreciate if someone could review it against the drawing to make sure that my measurement are accurate
Sub Cut list
top : 24 X 24
bottom: 24 X 23 ¼
front: 24 X 23 ¼
Baffle (front no 2) : 24 X 19 ¼
Back: 24 X 22.5
Horizontal brace : 21 ¾ X 19 ¼
Vertical Brace 19 ¼ X 22.5
Horizontal port 2 X 2.5 X 22.5 and 1 X 14 X 19 ¼
Vertical port 2 X 13 X 2.5 and 1 X 12 ¼ X 14
Top vertical port 3 ¼ X 14
Side 2 X 24 X 24
Sub Cut list
top : 24 X 24
bottom: 24 X 23 ¼
front: 24 X 23 ¼
Baffle (front no 2) : 24 X 19 ¼
Back: 24 X 22.5
Horizontal brace : 21 ¾ X 19 ¼
Vertical Brace 19 ¼ X 22.5
Horizontal port 2 X 2.5 X 22.5 and 1 X 14 X 19 ¼
Vertical port 2 X 13 X 2.5 and 1 X 12 ¼ X 14
Top vertical port 3 ¼ X 14
Side 2 X 24 X 24