Let's say that one is taking measurements of the raw drivers installed in their intended enclosure. If one were to take off axis measurements at this time, would the crossover simulations be accurate for on and off axis measurements, or are other considerations necessary?
Another Measurement Techniques Question
Collapse
This topic is closed.
X
X
-
short answer: usually, but it depends.
If you do all all your work with raw data (one mic position for measuring all drivers at a good farfield distance for proper summing, proper gating for bass, etc...) then it can yield accurate off-axis simulations if you use the off-axis measurements (you don't mention what tool you're using for sims)
CdiVine Sound - my DIY speaker designs at diVine Audio- Bottom
-
Originally posted by dsrviolaLet's say that one is taking measurements of the raw drivers installed in their intended enclosure. If one were to take off axis measurements at this time, would the crossover simulations be accurate for on and off axis measurements, or are other considerations necessary?- Bottom
Comment
Comment