Nice chasis for DIY electronics

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • JonMarsh
    Mad Max Moderator
    • Aug 2000
    • 15311

    Nice chasis for DIY electronics

    Hi guys,

    Spent a fair amount of the weekend building a new chasis for the electronic crossover for the X1 Klones- it never really fit in the original single rack high chasis (some caps and regulator heatsinks were too tall), plus I made the decision to go to full transformer balanced outputs, using some Dean Jensen transformers (-3 dB points at 0.1Hz and 15 MHz)- these AREN'T small transformers for line level!
    After some research, I found some chasis at SESCOM, black anodized sides, bottom and top, clear anodized fronts and backs, modular construction, and a double rack height chasis, about 13" deep, was only around $60.00. I'm about 3/4 finished with the conversion, next week I should have the web site up and can post images.
    If you're into doing electronics projects, or even if you want something prettier for an existing project/piece that a little utilitarian (my Marchand passive preamp comes to mind), these could be the way to go.

    At http://www.sescom.com

    Regards,

    Jon




    Earth First!
    _______________________________
    We'll screw up the other planets later....
    the AudioWorx
    Natalie P
    M8ta
    Modula Neo DCC
    Modula MT XE
    Modula Xtreme
    Isiris
    Wavecor Ardent

    SMJ
    Minerva Monitor
    Calliope
    Ardent D

    In Development...
    Isiris Mk II updates- in final test stage!
    Obi-Wan
    Saint-Saƫns Symphonique/AKA SMJ-40
    Modula PWB
    Calliope CC Supreme
    Natalie P Ultra
    Natalie P Supreme
    Janus BP1 Sub


    Resistance is not futile, it is Volts divided by Amperes...
    Just ask Mr. Ohm....
  • EMT
    Member
    • Aug 2000
    • 44

    #2
    I saw one of their ads in the Old Colony catalog. Was wondering if their products were any good. Thanks for the info.

    Comment

    Working...
    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"