Hello all,
Could I please get some feedback on the crossover schematic attached and its theoretical frequency response? This is a 4-Way Crossover stacked as shown in the picture attached. Please note, the design has been altered to remove one of the tweeters, so the drivers used are as follows: 4x HiVi D10.8 in parallel (Each pair of D10.8 are mounted in a tuned 25Hz 110 Litre ported cabinet), 2x HiVi D6.8 in parallel (Each mounted in separate 9L sealed enclosures), 2x HiVi DNM-A in parallel, and 1x T20.
Let me know if anyone has any thoughts or interpretations to potential improvements from the current desing.
Thanks
Could I please get some feedback on the crossover schematic attached and its theoretical frequency response? This is a 4-Way Crossover stacked as shown in the picture attached. Please note, the design has been altered to remove one of the tweeters, so the drivers used are as follows: 4x HiVi D10.8 in parallel (Each pair of D10.8 are mounted in a tuned 25Hz 110 Litre ported cabinet), 2x HiVi D6.8 in parallel (Each mounted in separate 9L sealed enclosures), 2x HiVi DNM-A in parallel, and 1x T20.
Let me know if anyone has any thoughts or interpretations to potential improvements from the current desing.
Thanks
Comment