Enclosure volume for c173n-t6-90

[igy137]

I'm drafting some cad drawings for the cabinet of a c173n-t6-90, and wondering what would be the proper volume to use.

I saw using anything from 9L, 3L, calc'd 5L to critically damped from factory t/s (which was quite close to my measurements without burn-in).

So any advice, which one should I start with?

[Jed]

I'm drafting some cad drawings for the cabinet of a c173n-t6-90, and wondering what would be the proper volume to use.



So any advice, which one should I start with?

You might want to tell us a little about your design goals first and what bandpass frequencies you'll be using, or whether you want the box tuning of the mid to help hit a desired acoustic transfer function yet still minimize excursion within it's intended passband... etc. It depends on a lot of factors, not just plugging in T/S parameters.

Regarding how I used this driver in the past, please check your PM about that.

Thanks,

Jed