Has anyone used this driver before? my friend needs a new decent sounding sub for his house and i was thinking one of these would be a possible place to start...
ACI SV10 Treated Paper Cone Subwoofer 56$
The SV10 Subwoofer is a good choice for home or autosound applications. The speakers were custom made for Audio Concepts, Inc. by NCA Laboratories of California.
The SV10 Features:
16 mm linear one way excursion!
High strength, 16 gauge steel basket encapsulated in a corrosion resistant polyester coating.
Double 42 ounce magnets
Nomex spider with extra travel
A glass reinforced plastic damper ring supports the spider and elevates it to allow for extreme excursion. Greater excursion than virtually any cast frame!
1.6" long high temperature voice coil
Heavy, non-resonant, pressed pulp cone
Large Sanoprene roll surround
Bumped Back Plate
Aerospace adhesives and thread locked screws used in construction
Gold plated 1/4" spade terminals for solid connections
Made in USA
Suggested Sealed Alignments:
0.7 cubic foot sealed box for and F3 of 40Hz in home. A plate amplifier with a boost on the low end should push it down to the lower 30's.
When used in a car, assuming 6dB of cabin gain and same sealed box, this woofer should get down to 20Hz.
Suggested Vented Alignments:
1.7 cubic feet with a 3" diameter vent by 15" long. F3 in this box is 25Hz with a slight boost on the low end. If used with a plate amp that has a boost, it might seem boomy in this vented box.
or does anyone know of a better driver around this price range?
Thanks Guys
ACI SV10 Treated Paper Cone Subwoofer 56$
The SV10 Subwoofer is a good choice for home or autosound applications. The speakers were custom made for Audio Concepts, Inc. by NCA Laboratories of California.
The SV10 Features:
16 mm linear one way excursion!
High strength, 16 gauge steel basket encapsulated in a corrosion resistant polyester coating.
Double 42 ounce magnets
Nomex spider with extra travel
A glass reinforced plastic damper ring supports the spider and elevates it to allow for extreme excursion. Greater excursion than virtually any cast frame!
1.6" long high temperature voice coil
Heavy, non-resonant, pressed pulp cone
Large Sanoprene roll surround
Bumped Back Plate
Aerospace adhesives and thread locked screws used in construction
Gold plated 1/4" spade terminals for solid connections
Made in USA
Suggested Sealed Alignments:
0.7 cubic foot sealed box for and F3 of 40Hz in home. A plate amplifier with a boost on the low end should push it down to the lower 30's.
When used in a car, assuming 6dB of cabin gain and same sealed box, this woofer should get down to 20Hz.
Suggested Vented Alignments:
1.7 cubic feet with a 3" diameter vent by 15" long. F3 in this box is 25Hz with a slight boost on the low end. If used with a plate amp that has a boost, it might seem boomy in this vented box.
or does anyone know of a better driver around this price range?
Thanks Guys
Comment