I built an approximately 2 cu ft sub with a passive radiator using an RSS315hf 4
and a CSS 15" 1050 pr.
Should I make sure the box joints are well sealed like I would have to do with a sealed box?
Should the box be stuffed or damped, or is this personal preference?
Any suggestions and opinions are appreciated.
Bri
and a CSS 15" 1050 pr.
Should I make sure the box joints are well sealed like I would have to do with a sealed box?
Should the box be stuffed or damped, or is this personal preference?
Any suggestions and opinions are appreciated.
Bri
Comment