Fb for Aurasound NS10-513?

[antivawt]

A couple weeks ago I posted asking for help to replace the 8" woofers for my watt/puppy clones.

After reading several positive comments about the Aurasound's from Jed, Jon Marsh, Rick Craig, and others. I decided to go with one NS10 vs two 8's.

The max I can go on the closure is 59.6L gross, take out about 5L for bracing/port so 55L net. Could go smaller on the box if needed.

How does Fb 25hz look? Flared 3x13.45 port. F3 35hz, F6 24hz. The freeware program I found does not take in consideration for room loading?

Could someone run a simulation for me with a better program?

Thanks, Kevin

[ThomasW]

How does Fb 25hz look? Flared 3x13.45 port. F3 35hz, F6 24hz.

Sounds about right

The freeware program I found does not take in consideration for room loading?

No freeware program does that.

Could someone run a simulation for me with a better program?

I'll run a sim for you in the mourning

[Jed]

This is close to what I would recommend. This is with .4ohm resistance external components (inductor dcr). See attached.

[antivawt]

Thanks Jed, I'll let you know how it turns out.

Kevin