Hi all,
I need to upgrade my bass bins but there are a few constraints and/or requirements:
> 1.5 cuft (wife dictates this) “no ugly boxes near/at my tv!”
= 10” driver (because of the above)
80 – 250 HZ zone (subs do duty for below 80 HZ)
The ones I have now are 8” drivers which work “okay” but I think I could get away with something a little bigger (box size) without too much complaint from my wife!
My system is made up of Audax drivers, so I found something that may compliment them for a bass bin. The HT240Z0. It is a good price also! I am open to other suggestions for 10” drivers, so please inform me of some others.
So I started to design a box using Unibox404, and I used the manufacturer’s recommended tuning. (well approximately) They suggest 55 HZ tuning for a 45L box, so I opted for the same tuning in a 25L box. This is where I questioned myself as to tuning. I assumed that I choose the correct tuning for my range (80-250) and driver specs. (see attached)
Did I do this correctly?
Is there maybe a better driver for under $60 that would fit my requirements?
I need to upgrade my bass bins but there are a few constraints and/or requirements:
> 1.5 cuft (wife dictates this) “no ugly boxes near/at my tv!”
= 10” driver (because of the above)
80 – 250 HZ zone (subs do duty for below 80 HZ)
The ones I have now are 8” drivers which work “okay” but I think I could get away with something a little bigger (box size) without too much complaint from my wife!
My system is made up of Audax drivers, so I found something that may compliment them for a bass bin. The HT240Z0. It is a good price also! I am open to other suggestions for 10” drivers, so please inform me of some others.
So I started to design a box using Unibox404, and I used the manufacturer’s recommended tuning. (well approximately) They suggest 55 HZ tuning for a 45L box, so I opted for the same tuning in a 25L box. This is where I questioned myself as to tuning. I assumed that I choose the correct tuning for my range (80-250) and driver specs. (see attached)
Did I do this correctly?
Is there maybe a better driver for under $60 that would fit my requirements?
Comment