I'm looking for a driver with some very specific attributes, and I'm beginning to feel it does not exist. This is what I need:
1) Mounting depth no more than 2.25" (57mm)
2) Cutout no larger than 5.25" (133mm)
I would also like
3) price <$50 per driver
4) vented motor
5) low distortion between 80hz and 2000hz
6) 4+mm xmax
If you haven't guessed yet, this is for my car. I want to take what I've learned building home speakers and apply it to car audio. I have all necessary equipment to take measurements, as well as a box full of leftover crossover components to experiment with.
I would love to use the Dayton RS150-4, except it is too deep :-(
Dan
1) Mounting depth no more than 2.25" (57mm)
2) Cutout no larger than 5.25" (133mm)
I would also like
3) price <$50 per driver
4) vented motor
5) low distortion between 80hz and 2000hz
6) 4+mm xmax
If you haven't guessed yet, this is for my car. I want to take what I've learned building home speakers and apply it to car audio. I have all necessary equipment to take measurements, as well as a box full of leftover crossover components to experiment with.
I would love to use the Dayton RS150-4, except it is too deep :-(
Dan
Comment