Need help with DCX2496 for bass bins

[dynamowhum]

Hey gang long time no write. Following Thomases instructions awhile back I made some bass bins to go along with the Nat Ps. Well to make a long story short aftering reading the DCX manual I am lost. Could anyone help a poor soul out. All I want to to pull the midbass out of the signal path to power the bins. Thanks.
If it matters I have an Emotive preamp and amp setup. Thanks for your consideration

[ThomasW]

Start by loading one of the existing presets. There are several you could start with, then customize it for your speakers.

If all you want to do is bi-amp between the NatP and bass bins, there's a 3 channel bi-amping preset. You'd only need to use 2 of the channels.

If you're running subs there's a stereo bi-amp with mono sub, or there's a stereo 3 way.

Load any of these then adjust the parameters for your needs.

[Dennis H]

Do you have the PC software? It's a pretty intuitive way to set things up.

[Davey]

dyna,

Yep, definitely rig up a serial cable to your computer so you can make use of the Behringer Windows application. It's sooooooo much more convenient and easier to use than pushing buttons on the front panel. If you do that we can exchange .xpc files and help you out.

Cheers,

Dave.

[dynamowhum]

thanks guys i will look into the software