I am designing a dual regulated power supply +/- 11V to +/- 16 V for my +/-12 and +/-15V opamp stuff. It will also do a lot more current than necessary as I will use it for other stuff should I ever need to (hence the big filter caps).
Anyway, here is the schematic:
I would like recommendations as to what cap types to use (electrolytic or tantalum where applicable) and what my bypass caps should be (right now 1uF polypropylene + 10nF ceramic C0G). Maybe I could just use a 100nF X7R ceramic instead? Or 1 or 10uF ceramic X7R with 10nF C0G? I dunno. I'm just shooting for <1mV ripple at full output after the regulators, and making things uber-overdone on a DIY scale isn't really that much more costly. But I would like to avoid making it look silly at the same time.
Thanks for any help!
Anyway, here is the schematic:
I would like recommendations as to what cap types to use (electrolytic or tantalum where applicable) and what my bypass caps should be (right now 1uF polypropylene + 10nF ceramic C0G). Maybe I could just use a 100nF X7R ceramic instead? Or 1 or 10uF ceramic X7R with 10nF C0G? I dunno. I'm just shooting for <1mV ripple at full output after the regulators, and making things uber-overdone on a DIY scale isn't really that much more costly. But I would like to avoid making it look silly at the same time.
Thanks for any help!
Comment