I'm trying to get my SE up and running using a laptop (1.6 ghz Celeron M) and the Maudio Transit. I had a problem with my IR not being at zero on the timeline. After alot of fussing changing the Transit to Low latency put the IR at zero. Usually. Sometimes it's a little farther down. I think this only happens when I get strange calibrations, ie instead of wavy green lines, the IR is wavy. The impedence is accurate and usable either way though, I think. But when I start doing SPL obviously this jumping around can't be happening. I only post here to get a little more feedback, the SE user group doesn't seem to get alot of discussion. So Jon Marsh or Zaph feel free to chime in ;x( :B
Check these out and you'll see what I mean:
Good calibration: http://f1.grp.yahoofs.com/v1/wMGhRVf...h/impcalibrate
Not so good: http://f1.grp.yahoofs.com/v1/wMGhRRU...calibrate2.JPG
And some HiVi M4N measurements:
PS: can I upload directly to this site or can I only link to others?
Thank you for any help guys!
Brandon
Check these out and you'll see what I mean:
Good calibration: http://f1.grp.yahoofs.com/v1/wMGhRVf...h/impcalibrate
Not so good: http://f1.grp.yahoofs.com/v1/wMGhRRU...calibrate2.JPG
And some HiVi M4N measurements:
PS: can I upload directly to this site or can I only link to others?
Thank you for any help guys!
Brandon
Comment