New projet

[spicer]

I would like to built a speaker With a tweeter ruban may be (RT2CA) HI-VI

And this speaker most have hight BD (+- 95) i need hight db because
my power amp have juste 25/ch. (Sugden A21A)

Budjet is $600.Can. above finition..

Spicer

[ThomasW]

Don't get fooled by the 1700Hz recommendation for the crossover. These can't handle any resonable amount of power that low.

Also independent testing has shown they have pretty high distortion levels.

[spicer]

OK ThomasW

What is your recommendation for speaker 2 way (in floor) with or with out ruban

I lisent jazz and metal etc....

and witch one mid bass ??

[ThomasW]

I can recommend lot's of 2 way designs. Unfortunately none work very well with a 25 watt amp unless you're sitting nearfield or in a small room.

[spicer]

I can recommend lot's of 2 way designs. Unfortunately none work very well with a 25 watt amp unless you're sitting nearfield or in a small room.

Yes i have a small room 14x11 feet (may be on a few years i diy and order power amp ULC400)

I know we have a very big choice for built a speaker (free for all)

It's for this reasons that why I ask you your suggestions

[westrock]

If you take the low bass out of the equation, 25W is alot of power.

[spicer]

I

I had one recommandetion is the Audax AM 210 Z2

Does someone have already try it?

[cinema bob]

pispeakers.com

check out the 2pi towers they are very effecient

[ThomasW]

I had one recommandetion is the Audax AM 210 Z2

Harmon International bought Audax several years ago and ceased production of all Audax products. It probably doesn't make sense to try and build a speaker using drivers made by a company that's out of business.

[spicer]

ok Forget the Audax is not avaible

for order suggestion

This store is on a few mille of my home

http://www.solen.ca/

thank

[ThomasW]

I'm certainly aware of Solen, we order parts from them.

Solen doesn't have any Audax AM 210 Z2

Other than that I don't know what you're asking with your last post. The language barrier is problematic in this thread.

[jdybnis]

I think he is saying he's skipping the Audax idea, and he wants to buy parts from Solen because they are close by. Any suggestions?

[ThomasW]

As I stated many posts ago, I don't pay attention to high sensitivity designs. As a result I don't have any to recommend.

He's just going to have to Google for the particulars he wants. Audio Asylum forum has a high-efficiency section that's probably a good a place to checkout.