How many of you guys use sealed sub designs? What works for you? Lets see some pics!
Sealed subwoofer guys
Collapse
This topic is closed.
X
X
-
*raises hand*
3000 cubic feet in the box. Two fifteens. 240W. Love it, though the drivers leave a bit to be desired - just waaaay too much mechanical noise down low.
CdiVine Sound - my DIY speaker designs at diVine Audio- Bottom
-
-
I used a dual Tempest .6Q wall mounted sub for years and loved it.
IB subwoofer FAQ page
"Complicated equipment and light reflectors and various other items of hardware are enough, to my mind, to prevent the birdie from coming out." ...... Henri Cartier-Bresson- Bottom
Comment
-
-
Contrabass ported? I thought that the contra had dual active and dual passive radiators.
Subs for the mains too, cool.
Ajpoe,
Just wondering how many filter banks do you use on your BFD.Once I figured out TrueRta I got it down to two banks.Do you use any electronics to extend the frequency response?Here is my LCR "Trio". Way to go guys !- Bottom
Comment
-
-
Originally posted by sfoggpassive radiators are just another type of port.
Their own sets of benefits and downfalls. Response is often equivalent to what you could achieve using a port. But ports, they are not.
CdiVine Sound - my DIY speaker designs at diVine Audio- Bottom
Comment
-
PR's and ports are both 'vented' alignments, let's just leave it at that.... :wink:
IB subwoofer FAQ page
"Complicated equipment and light reflectors and various other items of hardware are enough, to my mind, to prevent the birdie from coming out." ...... Henri Cartier-Bresson- Bottom
Comment
-
Originally posted by ThomasWAnd you traded it in for a _____ ? :wink:
Actually, I think the Tempests sounded better at low volume than the AV12s. Must be the suspension. I actually thought about trying 4 DPL12s instead but not sure if I want to give up the overhead. Of course I've put off some tests with the AV12s to make sure it's not related to something else.
Pete- Bottom
Comment
-
-
Now Tom, that's just not fair.
Actually, I think the Tempests sounded better at low volume than the AV12s. Must be the suspension.
IB subwoofer FAQ page
"Complicated equipment and light reflectors and various other items of hardware are enough, to my mind, to prevent the birdie from coming out." ...... Henri Cartier-Bresson- Bottom
Comment
-
IIRC you used some sort of velvety fabric right? I'm rethinking some of my finishing options of my sonosub and I think this might look good. Also, where did you get it and approximately how much was it?- Bottom
Comment
-
Might as well post my specs too even though it's not fully completed yet.
15" Avalanche ~100L (~3.5 cu ft.) with a Q ~.547 powered currently by the ~100 watt amp off of my 10" dayton sub until I can figure out what's wrong with my EP1500. The thing still pounds off of 100 watts which is probably why I haven't gotten around to actually figuring out exactly what's wrong with my pro amp.
Images not available- Bottom
Comment
-
Originally posted by kgveteranAjpoe,
Just wondering how many filter banks do you use on your BFD.Once I figured out TrueRta I got it down to two banks.Do you use any electronics to extend the frequency response?AJPoe - - Growing old is inevitable, growing up is optional!- Bottom
Comment
-
Here's my lastest shiva sub, a 62l sealed powered by a 360w plate amp. Sold my last 95l vented, as my wife told me it was too big. So I built two like the one posted and she only "allowed" me to keep one in the room, the other is awaiting a buyer! I was planning on using each one a speaker stand for my new Audax mains I also built at the same time. Next time I will build abigger room! :W
Image not available- Bottom
Comment
Comment