I'm thinking about retrofitting my existing center channel speaker with drivers from my mains and rear channel speakers:
Tweeter: Morel MDT-30
Midbass: Peerless HDS 850439
(Or simply building another box for the center channel speaker, now that I think of it, I can reduce the height by 1" and width by 3" if I rebuilt the box).
I wanted some opinions on the Morel MDM-55 midrange that I would use to fill in the mid's in a W(T/M)W configuration for the center channel (click on the link below for visualization of the speaker.
Center Channel speaker
My current drivers in the center channel are:
Tweeter: Phillip AD11600/T8
Midrange: Peerless 1385 (KO40MRF)
Woofers: Vifa M18-WO-09
(I built this center channel when I still had different speakers which used the same tweeter and midrange, but now I think I want to use the drivers in my current speaker setup).
I'm aiming for a better timber matched front soundstage.
I don't think I want to go with a sideways MTM configuration due to disperion characteristics, thus my desire to use the Morel MDM-55 for the midrange.
Any thoughts?
PatCave; HT Pix;Gear;DIY Projects;DVDs; LDs
Tweeter: Morel MDT-30
Midbass: Peerless HDS 850439
(Or simply building another box for the center channel speaker, now that I think of it, I can reduce the height by 1" and width by 3" if I rebuilt the box).
I wanted some opinions on the Morel MDM-55 midrange that I would use to fill in the mid's in a W(T/M)W configuration for the center channel (click on the link below for visualization of the speaker.
Center Channel speaker
My current drivers in the center channel are:
Tweeter: Phillip AD11600/T8
Midrange: Peerless 1385 (KO40MRF)
Woofers: Vifa M18-WO-09
(I built this center channel when I still had different speakers which used the same tweeter and midrange, but now I think I want to use the drivers in my current speaker setup).
I'm aiming for a better timber matched front soundstage.
I don't think I want to go with a sideways MTM configuration due to disperion characteristics, thus my desire to use the Morel MDM-55 for the midrange.
Any thoughts?
PatCave; HT Pix;Gear;DIY Projects;DVDs; LDs
Comment