Audio Quest speaker &Interconnects with B&W/Classe

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts

  • Kal Rubinson
    replied
    Originally posted by rickc
    Does anyone have any experience with the following cables with both B&W and Classe equipment

    B&W 802D's Speakers-- Audio Quest Gilbraltar
    I used this combo for years. No problems.

    Leave a comment:


  • lastexit
    replied
    Originally posted by Dmantis
    They build very high quality cables from Entry level to Extreme High end. I don't think there is an Official cable that B&W and Classe like to use, but Audioquest could be that cable. Call them and ask.
    B&W uses Van Den Hul for all internal wiring.

    Leave a comment:


  • Dmantis
    replied
    Originally posted by lastexit
    Hate to bring up such an old thread, but I was wondering if Audioquest is the official "unofficial" pairing between B&W and Classe? I see quite a few dealers and B&W demonstrations using AQ cables. Just wondering if there's any sort of connection there, because I see them paired together a lot.
    They build very high quality cables from Entry level to Extreme High end. I don't think there is an Official cable that B&W and Classe like to use, but Audioquest could be that cable. Call them and ask.

    Leave a comment:


  • lastexit
    replied
    Hate to bring up such an old thread, but I was wondering if Audioquest is the official "unofficial" pairing between B&W and Classe? I see quite a few dealers and B&W demonstrations using AQ cables. Just wondering if there's any sort of connection there, because I see them paired together a lot.

    Leave a comment:


  • Aussie Geoff
    replied
    Judylou,

    How could we punish you for one little trippo. :W

    Still, its the cut and trust of this phorum :lol:

    Geoff

    Leave a comment:


  • JudyLou
    replied
    Originally posted by Gump
    Sometimes ears get thrusted in a bun-fight. Yes it can be painful. :E
    Man - that was not my evening for correct typing - trust! ops:

    Leave a comment:


  • Gump
    replied
    Originally posted by Kal Rubinson
    Ouch! :E

    Kal
    Sometimes ears get thrusted in a bun-fight. Yes it can be painful. :E

    Leave a comment:


  • Kal Rubinson
    replied
    Originally posted by JudyLou
    Yes they sound very good - but if in any way posible - try your dealer to loan you some for a week. Thrust your ears.
    Ouch! :E

    Kal

    Leave a comment:


  • JudyLou
    replied
    Originally posted by rickc
    Does anyone have any experience with the following cables with both B&W and Classe equipment

    B&W 802D's Speakers-- Audio Quest Gilbraltar
    Classe SSP 600 to CA 5200 Audio Quest Panther Audio Cables
    Classe CDT300 to SSP 600 AES-EBU Audio Quest Falcon cable.

    Please let me know the pros and cons
    Thanks
    Yes they sound very good - but if in any way posible - try your dealer to loan you some for a week. Thrust your ears.

    Leave a comment:


  • Aussie Geoff
    replied
    Guys,

    We need to keep this right on topic of how well or otherwise these work with B&Ws & Classe or I need to move or lock it... Most cable threads end up being bun-fights (hence the posting restrictions in the forum rules) - lets hope this one doesn't I know we can do it if we try!

    Geoff

    Leave a comment:


  • Jesse111
    replied
    You may enjoy a bit of educational reading to help you make an informed decision.

    This editorial gives you the truth about audio interconnect and speaker cables and wires and debunks the myths that often surround them.

    Leave a comment:


  • WI Rotel
    replied
    I use copperheads for my amp/preamp interconnects. Very nice indeed and very good price. In all truth, unless you buy a set of cables that is entirely made of silver (the only better conductor than copper) there will be no difference in which cable you use, as long as they are of adequate size, have decent sodering and have good shielding. Even with pure silver cables the difference is theoretical rather than audible. I haven't heard the electrically shielded db models but even with those (which cost exponentially more) the difference will be slight at best.

    Leave a comment:


  • Race Car Driver
    replied
    I havent used any of the ones you listened, or really compared many.
    However I have all AQ interconnects. The King Cobra's from the CD, DVD/DVDA/SACD player to the reciever and off to the amps. Im very pleased with the quality and sound. Im sure other options will sound just as good though, again ive never compared them to other brands or AQ models.

    Leave a comment:


  • audioqueso
    replied
    For the price of audioquest, just get some catcables. Plenty will preach good stuff about their stuff. I just ordered an optical cable from CatCables. First hi-quality toslink cable. Didn't think there would be that much difference compared to regular toslink cables. Definitely good stuff!

    FYI, from what others have mentioned on this board, you'll see a lot of people favor Catcables and Nordust.

    Leave a comment:


  • theMaximus
    replied
    Welcome to the forum. Cable is a bit of touchy subject on this forum since this site is sponsored by a cable manufacturer. The rules as I understand it states that you can't endorse specific manufacturer and provide links where you can purchase them. You are however allowed to discuss your experience with certain cables you have auditioned.

    That said, I do currently have 802Ds mated with Krell using an Audioquest bi-wire cable even though they are not Gilbraltar. I bought those cables when I bought my previous speakers (704s) have used them since. I really like the way they performed, but after reading numerous glowing reviews of QED Silver Anniversary on What Hi-Fi magazine, I bought a pair for my 802Ds. I noticed no difference between the two cables. That is not to say all cables sound equal, but I am assuming that if my current cable sounds great and performs very similar to something that got great reviews by many others, then it must be pretty good too.

    I am sure something as fine as 802Ds or Classe deserve good speaker wires and interconnects. Try auditioning a few different cables you are interested in using your set up at home and prepare to return the ones you feel is lacking. That I guess is the only way to find something that you like.

    Leave a comment:


  • LikeCoiledSteel
    replied
    Ut oh! Run and hide... a twisters a comin.

    Leave a comment:


  • rickc
    started a topic Audio Quest speaker &Interconnects with B&W/Classe

    Audio Quest speaker &Interconnects with B&W/Classe

    Does anyone have any experience with the following cables with both B&W and Classe equipment

    B&W 802D's Speakers-- Audio Quest Gilbraltar
    Classe SSP 600 to CA 5200 Audio Quest Panther Audio Cables
    Classe CDT300 to SSP 600 AES-EBU Audio Quest Falcon cable.

    Please let me know the pros and cons
    Thanks
Working...
😀
😂
🥰
😘
🤢
😎
😞
😡
👍
👎
Searching...Please wait.
An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

Please push the back button and reload the previous window.'
An unexpected error was returned: 'Your submission could not be processed because the token has expired.

Please push the back button and reload the previous window.'
An internal error has occurred and the module cannot be displayed.
There are no results that meet this criteria.
Search Result for "|||"