Ok folks I will have my Phoenix C's cabinets completed by Sunday. The next step is finding an inexpensive Digital XO/EQ until I can afford a better one like the the dbxDriverack or Berhinger ULTRA-DRIVE PRO DCX2496.
The Phoenix C which by the way stands for Cheap, uses two Dayton Audio 8" woofers PE# 295-310 along with a Tang Bang tweeter PE# 264-822 in a MTM arrangement. Everything else is standard Phoenix construction based on original design to be found at http://www.linkwitzlab.com.
My question is can I use a Behringer Ultra-Curve Pro DSP8024 as the ONLY crossover in the system feeding a separate amplifier? This system is to be actively amplified. Am I correct in assuming that I do not have to build a traditional passive XO to drive the speakers and using only the Behringer Ultra-Curve Pro as a crossover?
Another note: I would like to tweak the tweeter XO and Mid-range XO'er to get t just right in my room, so have a Digital XO/EQ is wanted, correct?
Thanks for the input.
MI-II-CENTS
______________
The TailWind Generation I
The Phoenix C which by the way stands for Cheap, uses two Dayton Audio 8" woofers PE# 295-310 along with a Tang Bang tweeter PE# 264-822 in a MTM arrangement. Everything else is standard Phoenix construction based on original design to be found at http://www.linkwitzlab.com.
My question is can I use a Behringer Ultra-Curve Pro DSP8024 as the ONLY crossover in the system feeding a separate amplifier? This system is to be actively amplified. Am I correct in assuming that I do not have to build a traditional passive XO to drive the speakers and using only the Behringer Ultra-Curve Pro as a crossover?
Another note: I would like to tweak the tweeter XO and Mid-range XO'er to get t just right in my room, so have a Digital XO/EQ is wanted, correct?
Thanks for the input.
MI-II-CENTS
______________
The TailWind Generation I
Comment